В fly-out DSP появляется ряд SQL (тумблер + порог 0..100) только в режиме FM.
Squelch работает per-slice: у слайсов свои WDSP-каналы, поэтому добавлены
поля/сеттеры FMSQ в TSliceChan/TCtrlSlice, ApplyFMSQToChan и восстановление
при переоткрытии канала. Роутинг события по SliceId (0=RXA, иначе слайс).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace OpenGLContextEx with OpenGLContext in MainForm, SpectrumViewOpengl, WaterfallViewOpengl, and WidebandView.
Switch the Lazarus project/program dependencies from LazOpenGLContextEx to LazOpenGLContext in ewsdr.lpi and ewsdr.lpr.
PixelScale was introduced in 092a202; restore the previous viewport/texture path: glViewport(0, 0, W, H), EnsureTexture(W, H), and UploadCurrentRow(W).
Две сохраняемые громкости: FVolume (RX) и FTxMonVolume (self-monitor
даунлинка на передаче, дефолт 40). Контекст монитора = TX + DUP + RX MUTE
off (тот же гейт, что аудио в движке). В этом контексте слайдер/SetVolume
правят FTxMonVolume, иначе FVolume; ActiveVolume — активная под контекст.
Автопереключение громкости RX<->TX-монитор на T/R (SetMOX) и при смене
RX MUTE / DUP во время передачи (ApplyActiveVolume). Обе персистятся
(tx_mon_volume в конфиге). Веб выровнен на ActiveVolume.
Фикс: слайдер громкости не синхронизировался с загруженным значением после
подключения (в rfDevice синкался только drive, volume пропущен) → слайдер
оставался на 70, движок брал сохранённое → «прыжок» при первом касании.
Добавлен TrkVolume.Position := ActiveVolume в rfDevice.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RX MUTE (self-monitor даунлинка на передаче): кнопка теперь доступна на
ВСЕХ бэкендах, а не только Pluto/QO-100. Активна только в DUP; без DUP
кнопка disabled и звук на TX не проходит (движок гейтит по
FKeepRXDuringTX=FDisplayDuplex — двойная защита: аудио-гейт + RXA не
кормится). Добавлен RadioController.DisplayDuplex. TFlatButton теперь
рисует disabled-состояние приглушённым (текст/рамка к фону).
TX pre-roll 8144->6096 (2 блока подушки вместо 3): обоснование «нужно 3
блока» опиралось на щелчок ~0.5с после старта, который на деле оказался
bfo-глитчом тона (устранён f2d0519), а не underrun'ом подушки. Латентность
старта TX ~-10мс; startup-щелчков под нагрузкой DUP не слышно (подтверждено).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Всплески на водопаде + щелчки в аудио при TX (openHPSDR TUN/DUP):
периодический ~72° фазовый разрыв передаваемого PostGen-тона на границе
TX-блока, в среднем ~5 раз за сессию, привязан к фазе тона.
Причина: TX-канал открывался с bfo=0 (13-й параметр OpenChannel). При
bfo=0 fexchange0 читает выход из кольца r2 асинхронно (заполняет DSP-поток),
а r2_outidx продвигается на out_size каждый вызов; при рассинхроне DSP-потока
блок изредка читается со швом → разрыв фазы тона (err=0, амплитуда постоянна).
В DUP этот сплаттер принимается обратно = широкополосная строка на водопаде
и слышимый щелчок.
Диагностика A/B: pihpsdr на том же WDSP/радио и на той же частоте 750 Гц —
чист; единственное отличие в открытии TX-канала — bfo=1 (transmitter.c:1316).
При bfo=1 fexchange0 ждёт Sem_OutReady и отдаёт полный выходной блок
синхронно/фазонепрерывно (wdsp/iobuffs.c). Продюсер даёт ровно один вход-блок
на вызов → стойла нет.
Исключено прямыми зондами: рендер, NB/NB2, перегруз ADC, потеря пакетов DDC
(seq), переполнение RX-очереди, временно́й разрыв в принятом IQ, burst
catch-up продюсера, TX-пейсинг.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Два источника фабрикации данных в TX IQ-поток рисовали всплески на водопаде
при передаче (openHPSDR, особенно TUN/DUP):
1. HPSDRNetwork (sender): анти-старв zero-fill при пустой очереди впрыскивал
нулевые пакеты = 1.25мс тишины прямо в поток = разрыв данных = всплеск.
Теперь пустая очередь → просто ждём следующий блок (модель dl1ycf pihpsdr
txiq_thread: данные не инжектируются никогда; короткий разрыв покрывает
pre-roll в FPGA-FIFO радио). Убраны DUC_FIFO_LOW/REANCHOR/ZeroPkt.
2. WDSPEngine (продюсер TTXDSPThread): silence-инъекция при стойле mic
впрыскивала лишний блок сверх mic-темпа (для TUN он нёс PostGen-тон →
боковые/разрыв темпа). Продюсер теперь строго mic-гейтед.
Замерено на эфире: всплески при TUN 5-6/сессию → ~1. Остаточный редкий клик
по прямому замеру НЕ из TX-пейсинга (sender ровно на радиоклоке 800 пак/с
через supply-limiting, дропов/underrun нет) — источник отдельный (дисплей/RX),
разбор позже.
Windows-ветка sender'а не тронута. Pluto — свой TX-тракт (TPlutoTXThread +
libiio DMA), задета только общая silence-removal (push-поток сам добивает
нулями). Обе не перепроверены на железе.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Диагностика временным TXLog (снят) вскрыла цепочку проблем TX-тракта:
- Задержка ~200мс своего сигнала в DUP: за время приёма ринг PortAudio-
микрофона наполнялся до упора (9600 сэмплов) и на старте TX бёрстом
оседал стоячим запасом в DUC-очереди. Фикс: TAudioInput.Flush на RX→TX
(заодно убрана передача в эфир аудио, записанного до нажатия PTT).
- Всплески на TUN: (1) старт — радио начинало с пустого DUC-FIFO; (2) по
ходу — пейсинг со строгой каденцией держал запас FIFO у нуля, джиттер
3-6мс давал underrun; (3) клип: голос из бэклога складывался с PostGen-
тоном (стоит после ALC) поверх шкалы, а сам тон при mag=1.0 давал
выброс Гиббса x1.18 на старте. Фиксы: pre-roll PrimeDUCIQ (THROTTLE +
3 блока подушки в очереди — sender метрит непрерывно, FIFO радио прижат
2000..2400), анти-старв доливка нулями до REANCHOR при просадке,
TUN_TONE_MAG=0.83, мьют mic-входа TXA при активном тоне.
- Огрызок TUN-тона в эфир на первом блоке следующего TX: стоп канала
dmode=1 ждал фейд, который некому прокрутить (продюсер уже остановлен) —
канал стопился по таймауту Sleep(1)x100 с недобранным сигналом в
буферах. Это же было и «остаточным фризом ~106мс» GUI на отпускании
PTT: чистый таймаут, фейд никогда не исполнялся. Фикс: dmode=0 +
синхронный слив/продувка канала 4 нулевыми fexchange0 на стопе и
старте (<1мс, штатные down-slew и flush).
- Дисплей: ResetPixelBuffers(TX_DISP_ID) на старте TX — усредняющая
история TX-анализатора показывала спектр тона прошлой сессии.
- StopRunning при активном TUN не чистил DUC-очередь и не сбрасывал
FTuning/тон — закрыто.
Латентность тракта mic→радио теперь ~43мс (WDSP 11 + подушка 21 + FIFO
10.4). Проверено на эфире: q=0..30, fill/drops/underrun=0, clip=0,
клоки радио/ПК без дрейфа (micRx 48000/с).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
TX-DSP поток (TTXDSPThread) больше не пересоздаётся на каждом T/R — он
создаётся один раз и живёт весь сеанс, на приём/передачу переключается
флагом FTXActive (поток при False просто Continue, не трогает канал/ring).
Тердаун перенесён в TWDSPEngine.Close. Раньше Terminate+WaitFor+Free на
каждом отпускании PTT давал фиксированные ~100мс пустого join-оверхеда
pthread_join, блокируя GUI-поток. Итог: 206→106мс, крупные фризы ушли.
Остаток ~106мс = плавный WDSP fade-out TXA (SetChannelState dmode=1) —
оставлен как есть (dmode=0 дал бы trailing key-click в эфир).
Попутно:
- MainForm: убраны прямые PbSpectrum.Invalidate из drag/wheel VFO/центра —
кадр рисует таймер по FSpectrumDirty (FPS-гейт; прямой Invalidate давал
GL-кадр на каждое событие мыши мимо гейта → треск в HDMI-звуке AMD APU).
- AudioOutput: const-секция после {$ENDIF} блока PA-констант.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- SPECTRUM_PIXELS 1024→4096 + настройка display_pixels (лимит точек
анализатора, SetDisplayResLimit); web-зеркало остаётся 1024 —
max-децимация в SnapshotPixels
- палитры водопада Classic/Inferno/Turbo + регулятор gamma (в LUT),
настройки wf_palette/wf_gamma, страница Waterfall → группа Rendering
- GL-водопад переведён на общий LUT/AGC-уровни базового класса
(убраны дубли ColorForDB/UpdateLevels)
- явные glViewport в GL-вьюхах умножаются на PixelScale (HiDPI),
текстура водопада — в физической ширине
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Пакет LazOpenGLContext заменён на LazOpenGLContextEx (форк в
../lazOpengl): Qt6-бэкенд работает поверх настоящего QOpenGLWidget
(своя C++-либа libqlclglwidget) вместо GLX-контекста на winId(),
поэтому --opengl теперь работает в нативной Wayland-сессии, а под
ws=qt6 открывается путь на Windows/macOS.
- uses OpenGLContext -> OpenGLContextEx (класс TOpenGLControl тот же)
- удалена заглушка QtPlatformAllowsOpenGLControls с советом про
XWayland: больше не нужна
- рантайм-зависимость: libqlclglwidget.so рядом с бинарником
(сборка: make -C ../lazOpengl/csrc install-app APPDIR=bin/x86_64-linux)
Проверено на живом эфире (QO-100): спектр/водопад через GL под
Wayland и xcb, прозрачность FBO-альфы починена в обёртке (forceOpaque).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Canvas на битмапе кадра больше не используется вообще (кроме редкого
ADC-overload пути с восстановлением альфы) — убраны все raw<->canvas
переходы, каждый из которых синкал весь битмап на Qt6 (~2мс):
- RawBegin/RawEnd: прямой доступ к пикселям через RawImage.Data +
BytesPerLine (bottom-up DIB win32 учтён отрицательным шагом)
- RawVLine/RawHLine (с пунктиром), RawFillRect, RawTriangleDown,
RawCurve (кривая = связные вертикальные сегменты по колонкам)
- кэш текстовых масок (TRawTextMask, LRU 48): строка рендерится canvas'ом
один раз белым-на-чёрном в свой мини-битмап, блитится raw с цветом;
все тексты кадра теперь Courier New
- конвертированы: маркер (метка без случайной цветной плашки), бикон-
маркеры, буквы слайсов, слайс-линии, AGC (пунктир 4/2 и 1/2, подпись
с фоном SpecFilter как раньше), края/VFO/TX-курсоры с треугольниками
- пофреймовый альфа-OR проход удалён: альфа чинится один раз в кэше
СЕТКИ после ребилда (canvas-текст там), кадр наследует её через memcpy
Дворд-блендеры (два 16-бит лейна на умножение, /256 вместо /255,
расхождение <0.4%) вместо побайтовых с div 255:
- BandPlanOverlay.CompositeStrip (~1мс -> ~0.2мс)
- SampleRateOverlay.CompositeCache (per-px альфа)
- VfoOverlay.BlendBitmapKey (keyed-магента дворд-сравнением)
- SpectrumView.DrawSpectrumGradient (source-лейны 1 раз на строку,
~1.6мс -> ~0.8мс)
Порог перестройки бэндплана: полпикселя вместо 1 Гц (на QO-100 с
decoder-lock центр подтюнивается непрерывно — был canvas-ребилд полоски
каждый кадр). Композиты внутри raw-лока (их BeginUpdate вложенные).
PerfLog: зона ui.composites отделена от ui.spec_alpha (=RawEnd).
Замер на эфире (Pluto, 576k, 52fps): кадр 8.3мс -> 1.67мс (5x),
со слайсом 2.1-2.3мс; UI-поток ~45% -> ~26% ядра, из них 15% — блиты
paint_spectrum/paint_waterfall (потолок Qt6-вывода). Визуально проверено.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Инструментация (ВРЕМЕННАЯ, не мержить в main):
- PerfLog.pas: зонные таймеры, отчёт раз в 5с в stderr (core% = доля ядра),
EWSDR_PERF=0 выкл, EWSDR_PERF_FILE=путь — дублировать в файл
- Замеры // PERF: сеть (DDC IQ/wideband), Pluto (rx_conv/tx_resamp/tx_fill),
DSP (push_iq/fexchange/slices/tx), аудио, UI (тики/draw/paint/gl_swap,
разбивка draw_spectrum по фазам)
- doc/PERF_PROFILING.md: карта зон, методика, выводы
Оптимизация CPU-рендера спектра (по результатам замеров на эфире):
диагноз — дорога не пиксельная работа, а чередование raw(ScanLine)/
canvas(QPainter) доступа к битмапу на Qt6 (~6 переходов за кадр, каждый
синкает весь битмап; полоса фильтра в тысячи пикселей стоила 4x дороже
полного memcpy кадра). DrawSpectrum перестроен в фазы calc->raw->canvas->raw
(2 перехода): FillBandRaw вместо Canvas.FillRect, DrawSliceFilterMarkers
разделён на raw-полосы + canvas-линии, композиты флагов и альфа-OR в
финальной raw-фазе. Кадр 8.3мс -> 6.1мс; spec_bands 1.87мс -> 0.03мс.
Альфа-OR проход на Qt6 подтверждён нужным (без него canvas-пиксели теряют
альфу и пропадают при блите), сам цикл ~0.08мс — оставлен; тумблер
EWSDR_ALPHA_FIX=0 только для экспериментов. Кисть перед AGC-подписями
теперь ставится явно (была остаточной после перестройки фаз).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Record grounded data-path analysis, per-DDC/RX2 deltas, the soft-vs-hard
WDSP channel split, preliminary decisions (4-6 hard DDCs, static first),
and the UI concept (edge markers, slices rail, ADC badge). Marked as a
work-in-progress draft.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Share one button paint routine: extract TFlatButton.Paint into
PaintFlatButton(canvas, rect, colors) and call it from both TFlatButton
and VfoOverlay.DrawButton — flag buttons now render identically to the
left panel (flat fill + border, no gloss), using theme Btn* colors.
Theme the whole flag card: the structural CLR_* palette (card bg,
border, text, dim, accents, freq, meter bg) is now derived from the
active TAppTheme via ApplyThemeColors, so flags follow light/dark like
the rest of the UI. Status accents (TX/SPLIT) stay fixed on purpose and
use a fixed dark text over their bright badges. Theme is pushed to
flags from ApplyDarkTheme and on creation via WireOverlayEvents.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Manual TextWidth/TextHeight centering pushed the glyph up-left on the
substituted monospace font (Linux). Let the widgetset center it with a
taCenter/tlCenter TTextStyle, fixing the A/×/SPLIT/TX badges.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flags (A + B+) now lay out in one pass: each sits beside its own filter
band as before, but a left neighbour pushes the next flag right so they
never cross (forward pack + backward pull-in on right-edge overflow).
LayoutFlags replaces the per-flag positioning; PositionVfoOverlay/
PositionSliceFlags are thin wrappers.
Identity is shown by a letter drawn at the top of each filter band in
the spectrum (both CPU + GL renderers), so a flag pushed away from its
band is still traceable. Letters and the flag letter-badge share one
per-slice palette (SliceColor); F is violet, not red, to avoid clashing
with the TX indicator.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Slice flags (B+) were staggered by i*12 which barely helped with the
96px-tall card and looked untidy. Put every flag — main A and slices —
on one row. Overlap of near-frequency flags to be handled next (leader
lines).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Independent RX slices sharing one panadapter: each has its own
freq/mode/filter/AGC/NR-NB-SNB-ANF, S-meter, volume and sound card.
VFO A = main receiver; B+ are soft fan-out WDSP channels within the
captured span (ideal for Pluto/QO-100; HW DDC path is Stage 3).
- WDSPEngine: soft fan-out (TSliceChan, ProcessSlices in DSP thread,
per-slice NCO/mode/filter/AGC/NR/NB/SNB/ANF + S-meter, OnSliceAudio),
FSliceLock serialises add/remove/set vs DSP; reopened on rate change.
- RadioController: TCtrlSlice with its own TAudioOutput/device,
Add/Remove/SetSlice*, RefreshSliceShifts keeps slices on target Hz
across centre changes. Slice letters start at 'B' (A = main receiver).
- UI: per-slice flags (VfoOverlay) with letter badge/close, filter-band
markers in BOTH GL and CPU renderers, drag-retune, wheel; flags placed
beside the filter band with flip, like the main flag. Ctrl+click adds.
- Main flag (slice A) visible whenever the left panel is hidden OR any
slice exists; synced with panel-driven DSP/mode/AGC changes.
- Perf: S-meter decoupled from flag chrome cache (FMeterDirty +
meter-only RefreshMeter via EnsureRendered); InvalidateVfoOverlay
avoids global overlay-cache churn on meter ticks.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Список устройств вывода ограничен AUD_MAX_VIS=6 видимыми строками — панель
больше не растёт бесконечно и не уезжает за низ спектра. При большем числе
устройств справа появляется полоса прокрутки ▲/▼ (строки сужаются под
колонку стрелок), клик листает FAudScroll не закрывая панель; стрелки гаснут
на краях. ≤6 устройств — как раньше, без стрелок.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DrawButton теперь рисует стеклянную кнопку как ползунок зум-бара: тёмная
скруглённая база-фаска + вертикальный глянцевый градиент (ярче вверху,
темнее внизу) + блик сверху и тень снизу. Хелпер GlossColor масштабирует
яркость цвета. Только при ребилде кэша — CPU-паритет сохранён.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TX-индикатор теперь кликабельный (хит HIT_TX → колбэк OnTxSelect) — задел
под выбор TX-слайса в мультислайсах. Три состояния цвета:
- передача идёт → красный;
- слайс выбран для TX → янтарный (CLR_TX_SEL);
- не выбран → нейтральный.
Новое состояние FTxSel прокидывается через SetExtState (пока True — один
слайс всегда TX-слайс). MainForm.OnVfoOverlayTxSelect — заглушка с TODO под
мультислайсы.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PositionVfoOverlay считает обе кромки полосы фильтра и ставит накладку справа
от неё по умолчанию; если справа не влезает (маркер у правого края) — рисует
слева от левой кромки. Возврат на правую сторону автоматически, когда снова
помещается. Убран прежний clamp-оверлап с маркером.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- S-метр: убрана метка +60 (вылезала за правый край), шрифт подписей
5→7 (читаемость), подписи сдвинуты ниже тика. Бар оставлен компактным,
ряду добавлено 3px под крупные метки.
- Градиент S-метра привязан к уровню dBm (S1→S7→S9→S9+18), а не к длине
бара — сильные сигналы уходят в красный раньше.
- Бейджи A/SPLIT/TX: высота 15→12px (верх на месте, низ приподнят) —
текст по центру, больше зазор до S-метра.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Полный редизайн накладки поверх спектра: шапка (слайс-бейдж A/B, ширина
фильтра, кликабельный SPLIT, индикатор TX), метр-ряд (индикаторы NR/NB/ANF/
SNB + сигнал-бар), крупная частота + S, нижний бар с fly-out пикерами.
- Fly-out движок MODE/DSP/AUD (раскрываются под баром, карточка растёт):
MODE — сетка режимов 4×2 + фильтры; DSP — NR/NB/SNB/ANF + AGC; AUD —
выбор аудио-устройства вывода (задел под слайсы).
- Слайдер громкости (click+drag) + mute; SPLIT-toggle; live TX-индикатор.
- Все контролы подключены к RadioController (SetVolume/ToggleMute/SetSplit/
EnumOutputDevices→ApplyAudioDevice); wire в MainForm + HandleMouseUp, чтобы
клик по накладке не уходил в спектр.
- FormatFreq на Int64 (double накапливал ошибку в десятки Гц на ~10 ГГц QO-100).
- S-метр ниже по высоте + плавный градиент по уровню dBm: тёмно-зелёный→
зелёный→жёлтый→красный (красный к ~S9+18).
- Кэш+dirty рендер сохранён (CPU-паритет со старой накладкой), GL-путь через
DrawOverlayBitmap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Зум был per-band только для HF (TBandSettings). XVTR-слоты хранятся отдельно
(TXvtrEntry) и зум туда не попадал — при входе в трансвертер не восстанавливался.
- TXvtrEntry: LastZoomFactor/LastPanSlider + Default/Load/Save (JSON).
- SaveCurrentBand (XVTR-ветка): пишет зум/пан в слот.
- ActivateXvtr: восстанавливает зум слота + SetZoomPan (re-arm анализатора).
Покрывает все входы (кнопка, старт по LastXvtr, CAT/web).
- ApplyZoom: кэширует в активный слот — XVTR при активном трансверторе,
иначе HF-band.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Button/encoder indices follow Thetis MakeNewAndromedaDataset (our 0-based
index = Thetis Number - 1), verified against andromeda_test/AndDecode.pas.
The old map assumed sequential 0,1,2.. and truncated at 32; the real panel
sends sparse indices up to 47.
- AndromedaMap: AND_MAX_BUTTONS 32->48, renumbered button/encoder tables;
new actions abVFOAtoB/abVFOBtoA/abVFOLock/abStartStop/abShift.
- RadioController: VFO Lock (FVfoLock, rfVfoLock, SetVfoLock, gate in
TuneActiveBy).
- AndromedaPanel: wire A>B/B>A/SDR-ON/Lock; Shift band-keypad layer
(#28 latch, #29..39 -> SetBand 160m..6m, non-sticky); aiVFOLock/aiShift
indicators.
- Filter High/Low (#4/#5) left as width approximation per decision.
- doc/ANDROMEDA.md updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bidirectional Apache Labs Andromeda/G2 front-panel protocol on top of CAT.
Panel logic lives in dedicated units; existing files get only thin hooks.
New units:
- AndromedaMap.pas — data only: action enums + default button/encoder
layout tables and LED (ZZZI) numbers (mirroring the Thetis defaults)
- AndromedaPanel.pas — TAndromedaPanel: inbound panel events -> controller
actions (marshalled via Invoke), state subscription -> ZZZI push via SendProc
Hooks:
- CATEngine: parse ZZZD/ZZZU/ZZZE/ZZZP/ZZZS into generic TCATContext callbacks
- CATAdapter: creates the panel, routes engine callbacks to it, supplies the
SendProc to the Andromeda port, AddStateListener, ZZZS handshake
- CATSerial: Andromeda flag in port config + HasAndromeda/SendToAndromeda
- RadioController: AddStateListener (multicast, does not steal MainForm's
OnStateChanged)
- Settings/SettingsForm/MainForm: CATSerialAndromeda[0..3] + persistence + checkbox
First version: serial transport, hardcoded default mapping, LED indicators
(MOX/Tune/CTUN/VFO A-B/Split/NB/NR/SNB/ANF/Squelch). Doc: doc/ANDROMEDA.md.
TODO: default button mapping does not match the physical panel (hardcoded) —
to be fixed later; also ZZMF/LCD text, TCP G2V2 transport, configurable mapping.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Реализованы команды, ранее бывшие заглушками — функционал уже был в
TRadioController, но не пробрасывался в CAT:
- Split TX: ZZSP/FT/FR + split-байт в IF (новый RadioController.SetSplit)
- FM Squelch: SQ (0–255), ZZSQ (0–100%), ZZSO (on/off)
- FM CTCSS: CT/ZZTA (on), CN (1-based)/ZZTB (0-based тон)
- FM-репитер: OF (offset), OS (направление, с трансляцией Kenwood↔RPT_*)
- FM step: ZZST (00–03)
- CTUN: ZZCN; AGC-T/RF gain: ZZAR
- ANF: ZZNT (раньше ошибочно алиас NB)
- Шаги VFO: ZZAU/ZZBP (исправлен баг — были алиасы ZZFA/ZZAP), ZZSU
TCATContext расширен callback'ами (split, squelch, CTCSS, repeater, step,
AGC-T, CTUN); CATAdapter — геттеры/сеттеры/sync с маршалингом через Invoke.
Добавлен doc/CAT_STATUS.md — полный статус CAT и план работ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SyncWebConnect (web-коннект на десктопной GUI) собирал устройство сам
только из IP+BoardType, оставляя Kind=0 (=bkHPSDR) и пустые URI/Serial.
Из-за этого сохранённый Pluto подключался как openHPSDR → UDP discovery
→ Hardware Timeout (web при этом оптимистично показывал connected /
Unknown Board). Десктоп-путь и демон уже шли через ResolveDevice.
Теперь SyncWebConnect тоже зовёт FController.ResolveDevice(IP) —
единый резолв (восстанавливает Kind/URI/Serial/BoardType/MAC из стора
по IP или URI) для всех трёх входов.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Заменил дропдаун+слайдер на одну кнопку RF AGC (с подписью текущего
режима). По клику — оверлей (стиль как FNP-попап) с кнопками
FAST/SLOW/HYBRID/MANUAL + ползунок GAIN 0–73 дБ, активный только в
MANUAL. Крестик/клик мимо закрывают; выбор режима оставляет оверлей
открытым (чтобы сразу подвинуть слайдер). Бэкенд не тронут — те же
команды set_rx_gain_mode/set_rx_gain и state-поля. Только WebPageHtml.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Прокинул в web-интерфейс управление, которого там не хватало (раньше
только отображение):
- RF-AGC (Pluto hw-gain): дропдаун режима FAST/SLOW/HYB/MAN + слайдер
GAIN 0–73 дБ (активен только в MAN, драг переводит в manual). Виден
по BackendCaps.HasHWGain (= Pluto подключён). Команды set_rx_gain_mode
/ set_rx_gain → SetRxGainMode / SetRxGain.
- RX MUTE (QO-100 self-monitor): toggle-кнопка рядом с BCN, видна по
InQO100, подсветка по состоянию. Команда set_rx_mute → SetRxMuteOnTx.
Гейтинг зеркалит десктоп. Работает в GUI-web-сервере и headless-демоне.
Проверено на железе пользователем.
WebServer: команды + state-поля (rf_agc_visible/rx_gain_mode/rx_gain_db,
rx_mute_visible/rx_mute_on) + SetRxGainStatus/SetRxMuteStatus.
WebAdapter: колбэки OnRxGain*/OnRxMute (Invoke на поток контроллера) +
публикация в PushState. MainForm + ewsdrd.lpr: привязка колбэков.
WebPageHtml: виджеты, JS-обработчики, updRfAgc/updRxMute, PEND_MAP.
Также актуализирован doc/PLUTO_INTEGRATION_PLAN.md: TX-тракт и режим
QO-100 помечены проверенными на железе; раскрыт TODO «XO ppm-калибровка»
(ручной TxLOOffset как текущий обходной путь, xo_correction/GPSDO как
постоянное решение).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After tying the ruler font to the ruler height, the labels (drawn at a
fixed H/2-1 top) sat below center because the taller font extended
downward. Shorten the ticks (major H*0.34, minor H*0.20) and center the
label in the area beneath them using TextHeight, so the digits are
vertically centered at any DPI. Applies to both the normal grid and the
FM-step grid branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The ruler drew labels at a fixed Font.Size := 7, so on Windows display
scaling (125/150/200%) the text no longer matched the DPI-scaled ruler
height — labels came out too small or clipped. Tie the font height to
the ruler height (-Max(8, Round(H*0.45))) so labels scale with DPI,
matching the approach used by the new bandplan overlay.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a thin colored strip along the bottom of the spectrum (above the
ruler) showing the QO-100 narrow-band transponder bandplan: mode
segments (CW ONLY / NB DIGI / DIGI / SSB / MIXED MODES) plus the three
beacons (CW / PSK / EXP) as muted-red cells at their ranges.
- New unit BandPlanOverlay.pas (TBandPlanOverlay), modelled on
VfoOverlay: content rendered once into a cache bitmap, per-frame cost
is just a constant-alpha composite (CPU) / one textured quad (GL).
Cache invalidates only on view change (center/span/width) so it idles
while the QO-100 downlink display is static.
- Wired into both render paths: SpectrumView (CPU composite) and
SpectrumViewOpengl (texture, re-uploaded only when dirty).
- MainForm: SetView fed from SyncSpecViewFreq; visibility gated by
InQO100 (Pluto + full-duplex transponder), like RX MUTE / BEACON.
- DPI-robust: strip height scales with Screen.PixelsPerInch and the font
height is tied to the strip height (not point size), so labels always
fit at any Windows scaling.
- Segment/beacon frequencies and colors are a single editable table.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a per-operator toggle to hear your own downlink off the satellite
while transmitting (full-duplex self-monitor), and restrict QO-100-only
controls to the QO-100 mode.
- WDSPEngine: new MonitorRXDuringTX flag; audio gate becomes
`not FTXActive or (FKeepRXDuringTX and FMonitorRXDuringTX)` so RX audio
can pass to speakers during TX in full-duplex.
- Controller: FRxMuteOnTx (default True = mute RX on TX), SetRxMuteOnTx/
ApplyRxMuteToEngine, rfRxMuteOnTx notify; new InQO100 predicate
(Pluto + full-duplex XVTR slot) as the single gate for QO-100 UI.
- Settings: global RxMuteOnTx (rx_mute_on_tx, default True), persisted.
- MainForm: new RX MUTE button in TX panel next to DUP, visible only in
QO-100; BEACON button visibility tightened from "any transverter" to
InQO100 so it no longer shows in plain VHF/UHF modes.
- doc: plan updated (RF-AGC done, two temps, TX/RX locked split,
self-monitor, phase 6 done; remaining TODOs incl. web wiring).
Web intentionally left unchanged for now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pluto exposes two temperature sensors: the AD9361 transceiver
(ad9361-phy temp0/input, milli-°C) and the Zynq SoC/FPGA (xadc temp0,
raw+offset+scale → C = (raw+offset)*scale/1000). Only the former was
read. Now both are read and shown as "Temp 37/53C" (chip/SoC) in the
desktop status bar and web UI.
- ReadTelemetry gains an out SocTempC param (base + Pluto override);
Pluto reads xadc via the IIO context.
- Controller stores FLastPlutoSocTempC; SoC temp validated with a
plausibility window (no slew-limit — stable local sensor, unlike the
AD9361 sensor that spikes during mid-conversion).
- Status formatting handles one or both temps in MainForm and WebAdapter.
- Widen desktop status-bar field 3 (150→190) so both temps + RSSI fit;
web layout unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The PLL column (also used for QO-100 beacon status on Pluto) was
minmax(70px,90px), clipping "BCN LOCK 105Hz /7dB". Widen to
minmax(120px,185px), matching the desktop field-7 width. Frontend only.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the single tracked-beacon line with a filter band spanning the
beacon width, split into two halves (left/right Manchester lobes at
±400 Hz) with a central divider (carrier null) and band edges at
±450 Hz, matching the desktop dec-marker width. Reference frequency is
now a green dashed line. Frontend only (WebPageHtml).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror the desktop QO-100 beacon lock into the web interface and make it
work in the headless daemon.
Backend:
- WebServer: set_beacon/beacon_seed commands (+OnBeacon/OnBeaconSeed
events), beacon state fields, SetBeaconStatus, and beacon_visible/on/
text/ref_hz/track_hz in BuildStateJson. beacon_seed carries 'frac'
(0..1 click position); absolute Hz is computed controller-side from
live FCenterFreq/FSpanHz (mirrors desktop PixelToFreq).
- WebAdapter: OnBeacon->SetBeaconLock, OnBeaconSeed->BeaconSeedAtHz;
PushState mirrors compact status (matches MainForm.BeaconStatusText)
into the PLL status cell when visible (Pluto + active XVTR).
- MainForm/ewsdrd: wire the two callbacks.
- ewsdrd: call ServiceBeaconLock in the main loop @~10Hz (FRunning+
FWDSPReady gated). Without this the lock loop never ran headless.
Frontend (WebPageHtml):
- BCN button (visible only on Pluto+XVTR), highlighted while locked.
- Seed-on-mousedown with immediate return (like desktop FormMouseDown):
no drag/set_center so the gesture never moves the center / tears IQ.
Armed (first click after BCN) or Shift, mirroring desktop arm/Shift.
- PLL status cell shows beacon status (field-7 parity with desktop).
- Ref (green) + tracked (orange) beacon markers on spectrum/waterfall.
Known issue (unresolved): after lock the beacon can slowly drift off and
drop to "BCN sync". Suspected residual-sign anti-drift or retune-timing
on the web/daemon path; needs on-air diagnostics. See memory
project_web_beacon for the investigation state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless daemon never set the web server's FreqMhzDigits, so it
stayed at the constructor default (3 = up to 999 MHz) and VHF/UHF/SHF
frequencies didn't fit the web VFO display. The GUI mirrors this per-
device setting in ApplyFreqMhzDigits; the daemon now does the same on
connect (rfDevice) via PushFreqDigits, reading the value the controller
loaded into FLoadedGlobal.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fix: dragging/wheeling the spectrum in the web UI clamped frequency to a
hardcoded HF ceiling (vfoMax=60 MHz), so on Pluto VHF/UHF it snapped down
to 60 MHz and couldn't pan up (only the VFO wheel worked, via a different
limit). Push the backend's tuning range (BackendCaps.MinFreqHz/MaxFreqHz)
to the web alongside the band plan; JS vfoMin/vfoMax use freq_min/freq_max
from state. The transverter branch (XVTR_CUR>=0) is unchanged — it keeps
the wide-open range since the displayed RF freq is translated to IF and
clamped server-side.
Dead-code cleanup (audit of this session's work):
- SampleRateMode/TSampleRateMode: orphaned when the sample-rate
unification replaced the srmContinuous branch in ApplyBackendCapsToUI;
no readers left. Removed (+ now-unused PLUTO_MAX_SR).
- Pre-existing write-only/unused: TBackendCaps.MaxSampleRate,
SampleRateOverlay.SPAN_NAMES, MainForm.BAND_FREQ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Web band selector was hardcoded to the HF plan, so on Pluto it showed
160m..6m instead of the VHF/UHF plan and highlighted the wrong entry
(band switching itself already worked: web sends idx, controller maps it
via the IsPluto plan). Mirror the sample-rate unification.
Single source of truth = BoardUtils -> controller:
- BoardUtils: TBandInfo/TBandPlanArray + BuildBandPlan(Pluto).
- TRadioController.BandPlan returns BuildBandPlan(IsPluto).
Both UIs derive from it:
- Desktop already plan-aware (RelabelBands + RestoreBand) - unchanged.
- Web: WebServer.SetBands + "bands" in state JSON; hosts push
BandPlan on connect/startup; JS builds the band selector from
state.bands (BAND_N/BAND_F now dynamic).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Sample-rate (span) presets were duplicated in three places and none was
authoritative: HPSDR set hardcoded in the desktop overlay (SPAN_RATES),
Pluto set in backend caps, and a separate hardcoded list in the web JS.
The web showed HPSDR rates even on Pluto, and the web adapter silently
dropped any rate outside a hardcoded HPSDR whitelist (so Pluto-only rates
like 960k/2304k never switched).
Single source of truth = backend caps -> controller:
- HPSDRNetwork.Caps now fills RatePresets [48k..1536k] (was nil).
- RadioBackend: named type TBackendRateArray.
- TRadioController.SampleRatePresets returns BackendCaps.RatePresets.
Both UIs derive from it:
- Desktop: ApplyBackendCapsToUI always feeds the overlay from
SampleRatePresets (overlay no longer owns the HPSDR list).
- Web: WebServer.SetRatePresets + rate_presets in state JSON; hosts
(daemon OnState/startup, GUI ApplyBackendCapsToUI/startup) push
SampleRatePresets; JS builds span buttons dynamically from it.
- WebAdapter.SyncSpan validates against SampleRatePresets instead of a
hardcoded whitelist, so any backend rate is accepted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless daemon (ewsdrd) only ever built HPSDR devices, so Pluto
could not be used: backend is chosen by Dev.Kind and Pluto opens by URI,
neither of which the daemon propagated. Also local audio played on the
host and web Discover never probed network Plutos.
Shared, backend-agnostic helpers in TRadioController (used by GUI + daemon):
- ResolveDevice(IP): discovered->saved lookup restoring Kind/URI/Serial/
BoardType/MAC. MainForm.ResolveDevice now delegates here.
- AddSavedDevice(name, addr): web dev_add saves Pluto when addr has a URI
scheme (ip:/usb:/local:), else HPSDR. Both web hosts use it.
- SeedPlutoProbeFromSaved: seed network-probe URIs from saved Plutos
(no mDNS -> a network Pluto is only found by direct URI probe).
- LocalAudioEnabled flag (GUI=True): when False the local sound card is
neither opened nor written; RX audio goes only to web (OnAudioConsume).
DeviceStore.AutoStartDevice(out Dev): full autostart record (Kind/URI/
Serial) so a saved Pluto (URI-addressed, empty IPAddress on USB) can
autostart.
Daemon (ewsdrd.lpr): LocalAudioEnabled:=False; SyncConnect via
ResolveDevice; autostart via AutoStartDevice; SyncDiscover seeds probe
URIs then Discover; SyncDevAdd via AddSavedDevice.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Expose the QO-100 slot's LOError (Hz) on the QO-100 settings page,
placed right after LNB LO. Maps to Entries[QO100_SLOT].LOError — the
live LNB-drift calibration that the beacon lock folds its correction
into. Group height extended to 8 rows and the info label shifted down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the display-FFT centroid beacon lock with a decoder-based loop that
trims the active transverter's LOError from the beacon decoder's precise NCO
carrier estimate, compensating LNB drift so the whole downlink (incl. FT8)
stays put. Single BEACON button (lock = decoder). Also unifies the beacon
decoder filter marker between the CPU and OpenGL spectrum renderers.
Verified on air: lock holds, FT8 decodes cleanly.
The narrow beacon decoder filter marker rendered differently in the two
spectrum views: CPU drew a translucent filled band (BlendBand) plus a centre
line, while OpenGL drew three plain vertical lines (both edges + centre), so
it looked like one band on CPU and "two parts" on GL.
Make the CPU path draw the same three lines as GL — consistent look and
cheaper (drops the per-frame per-pixel alpha blend for this marker; BlendBand
is kept for the RX/TX passband shading).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the display-FFT centroid beacon lock with a decoder-based loop.
The beacon decoder already tracks the carrier precisely via its NCO
(squaring-FFT acquisition + Costas offload); its residual ResidHz+CarFreqHz
is an exact measurement of the beacon's offset from the aim point. Feed that
into LOError of the active transverter so the LO retunes to compensate LNB
drift — the whole downlink stays put, calibration persists.
RadioController:
- Remove MeasureBeaconFFT and all display-FFT lock state/constants
(lobe/search/track/slew/sym/shape/seed-gain/prom), fields
FBeaconManualSeed/FBeaconPromDB/FBeaconDecOn, methods
SetBeaconDecode/SetBeaconDecodeAtHz/BeaconDecodeEnabled.
- SetBeaconLock is now the master switch (lock = decoder); BeaconSeedAtHz
aims the decoder; ServiceBeaconLock measures beacon freq from the decoder
scope and trims LOError (gain 0.5, deadband 20 Hz, step clamp 400 Hz,
settle 8 ticks). Feed-forward of the aim keeps the decoder locked through
the retune (net baseband ~0). Lock/SNR now come from the decoder.
MainForm: single BEACON button — left-click toggles lock (+ opens the
constellation/bulletin scope, arms the spectrum click for aiming),
right-click shows/hides the scope. Spectrum click (armed or Shift) aims via
BeaconSeedAtHz. Simplified status field and markers.
Both targets build (lazbuild --ws=qt6 + build-ewsdrd.sh). Not yet verified
on air. Risk: BEACON_RESID_SIGN=+1.0 — flip to -1.0 if the loop runs away.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After successful on-air validation, drop the temporary diagnostics:
- IQ baseband dump to ~/ewsdr_beacon_iq.f32 (FDbgStream/DbgWrite2).
- BeaconLog file logger (~/ewsdr_beacon.log) and per-second STATE / AIM lines.
- Dead Gardner timing fields (FMidI/FMidQ/FHalf/FPrevI/FPrevQ), superseded by
the ML signal×slope TED.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Decode and show the AO-40 frame payload as text in the beacon scope window.
- RadioController.GetBeaconFrame exposes the latest 256-byte frame.
- BeaconScopeForm: poll the frame counter; on each new frame, parse the
payload (drop trailing 2-byte CRC, printable ASCII, 64-char lines, as in
gr-satellites qo100.parse) and append to a scrolling read-only memo.
- Window widened/heightened; constellation size capped to leave room.
Frame format verified offline against a real on-air capture: the decoder
produces the live QO-100 AMSAT bulletin text (RS errors=0).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Full chain now decodes the QO-100 central beacon to 256-byte AO-40 frames
on-air (frames>0, RS errors=0). Builds on M1 (stable BPSK demod).
FEC backend (BeaconFEC.pas, TBeaconFEC):
- AO-40 FEC: distributed sync (65 bit, step 80) -> 80x65 deinterleave ->
Viterbi r=1/2 k=7 -> CCSDS descramble -> 2x RS(160,128). Links system
libfec (Karn) load-time (libfec.so/.dll/.dylib). Viterbi AO-40 [0x4F,-0x6D]
remapped to libfec [0x6D,0x4F]. Validated against gr-satellites reference
vectors (fectest2: exact 256-byte frame, 0 mismatches).
DBPSK Manchester frontend (BeaconDecoder.pas):
- Chip-rate (800) processing: RRC matched filter -> ML signal-times-slope
timing recovery -> Costas -> Manchester combine (block phase select) ->
differential decode -> soft symbols to FEC.
- Carrier acquisition: squaring-FFT estimates the residual (carrier at +-pi/chip
defeats decision-directed Costas), one-shot pulls it to DC via residual NCO.
- Costas frequency offload into pre-RRC NCO (with deadband) tracks LNB drift
without hitting the +-pi Costas clamp.
- ML TED replaces Gardner, which degenerates on the Manchester chip stream.
Temporary on-air diagnostics retained (IQ dump + STATE log) pending wider
signal validation; to be removed before final cleanup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DUP toggle wrote FDisplayDuplex directly, bypassing the controller's
SetDuplex (which also sets KeepRXDuringTX live and fires rfDuplex). And
MainForm had no rfDuplex render case, so QO-100 auto-enabling duplex
(ActivateXvtr → SetDuplex) left the button unlit while FDisplayDuplex=True
— pressing DUP then turned it OFF when the user expected ON.
Single path now: ApplyDUP just calls SetDuplex; a new rfDuplex render case
styles the button and (when transmitting) switches the display source.
Both the button and QO-100 auto-enable go through it, so the button always
reflects state and KeepRXDuringTX stays in sync.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the TX-path work landed this session:
- §4.6: polyphase FIR interpolator + sample-rate-scaled TX buffer +
SoapyPlutoSDR confirmation of 32768 full-scale.
- §4.8 (new): power-linear drive→atten mapping, full WDSP digital level,
TX LO powerdown gated by PTT.
- Phase 4 status updated.
- Related fixes: per-band FM settings (SQL/CTCSS/step/repeater) restore on
startup — was dropped by LoadDevice; affects all backends.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TX LO (altvoltage1) is now powered down on RX and enabled on PTT, instead
of staying on continuously. Removes the TX carrier leakage that showed up
at the VFO frequency in the RX spectrum (and persisted after MOX), and
stops idle TX-LO radiation. ApplyTxLO sets powerdown from FTransmitting,
which also recovers the LO if external software (e.g. SDR Console) left it
powered down. RX LO (altvoltage0) is kept on — receive is continuous; QO-100
full-duplex still works (RX LO separate).
Trade-off: re-enabling the TX LO re-runs the AD9361 synth calibration
(a few ms), so the first syllable on SSB may be slightly clipped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
LoadDevice (bulk startup band loader) parsed only freq/mode/filter/AGC/
CTun/center/span and skipped the FM fields, while SaveBand writes them and
LoadBand reads them. So FM squelch, CTCSS, step and repeater shift were
saved on exit but reset to defaults on the next start (band switching kept
working — that path goes through the in-memory band cache, not disk).
Added the missing fmsq_on/fmsq_level/ctcss_on/ctcss_idx/fmstep_on/
fmstep_idx/fmrpt_dir/fmrpt_offset reads to LoadDevice, mirroring LoadBand.
Affects all backends, not just Pluto.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TUN produced no tone: TUNLevel default 10% mapped via the old dB-linear
attenuation curve (−89.75..ceiling) to −81.8 dB → effectively off. Now
power-linear: dB = ceiling + 20*log10(pct/100), so 10%→−30, 50%→−16,
100%→ceiling — usable across the whole slider.
Also keep WDSP digital level at full-scale for Pluto (ApplyWDSPDrive):
power is set once via hardware attenuation, not by scaling the WDSP path.
HPSDR unchanged (drive byte still drives the radio PA).
Note: at a given slider position Pluto TX is now much hotter than before
(50%: −49.9→−16 dB). Ceiling stays PlutoTxMaxAttDb (default −10 dB).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replaced linear interpolation upsampling (192k→device-rate) with a
polyphase FIR interpolator ×L. Prototype: windowed-sinc lowpass (Blackman,
~-58 dB sidelobes), TAPS*L long, cutoff TX_FIR_CUT=40k, normalized to unity
per-phase DC gain (loudness unchanged). Images at multiples of 192k are now
suppressed ~-58 dB instead of only sinc², cleaning up the uplink spectrum.
BuildTxResampler designs coefficients per FTxRatio in StartTX; FTxDlI/Q
delay line persists across SendDUCIQ calls, reset on StartTX/ClearDUCIQQueue.
Removed FTxPrevI/Q.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fixed 4096-pair TX buffer was too small for full-duplex above ~1 Msps
("not enough ... samples getting dropped" per SoapyPlutoSDR), causing
clicks/dropouts. Now sized as round(rate/60) rounded up to a power of 2,
clamped [4096..65536] (576k→16384, 1536k→32768). FIFO cushion (~4 buffers)
resizes to match in StartTX.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
QO-100 reuses the transverter path (VFO/band-stack/beacon-lock untouched)
with a split LO for the geostationary transponder:
- TXvtrEntry += FullDuplexTx + TxLOOffset (persisted). Reserve the last
XVTR slot (QO100_SLOT) for QO-100; migration restores the template when
the slot is unset or has empty offsets (fixes old configs showing zeros).
- XvtrTranslateTX: TX LO = visible - TxLOOffset (no LNB LOError) for QO-100;
identical to RX translate for normal transverters. Switched all TX-side
translate calls (controller + MainForm).
- SetDuplex wired (live KeepRXDuringTX); auto display-duplex on QO-100 entry.
- New "QO-100" settings page (LNB LO / transponder offset / downlink edges /
RX gain / TX ceiling + live RX-IF/TX readout); QO slot hidden from the
transverter table. Reuses OnXvtrChange — no MainForm wiring needed.
- doc/PLUTO_INTEGRATION_PLAN.md: phase 5 done.
Builds clean (headless + qt6 GUI). Not yet verified on hardware.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Show current drive value next to the slider: percent for openHPSDR,
TX attenuation in dB for Pluto (via controller PlutoTxAttForDrive;
unit flips on backend connect). Refreshed on drive change, device
render, and TX max-att change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Status bar / web now show Pluto/LibreSDR model + serial instead of
"Unknown Board" (BoardDisplayName in controller; UI just renders it).
- Field 3 shows AD936x chip temperature + RX RSSI for Pluto (no PA →
Supply only for openHPSDR). Polled via backend.ReadTelemetry (~2 Hz),
filtered for sensor glitches (plausibility window + slew-limit, with
anti-stick) — fixes rare bogus -15°C readings.
- Add libiio binding iio_channel_attr_read_double.
- Remove stale root pluto_integration.MD (superseded by
doc/PLUTO_INTEGRATION_PLAN.md).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Builds on the beacon-lock baseline: keeps the proven display-FFT control
path (hardware-LO trim folded into the active transverter LOError), and
hardens it. The narrowband NCO/FLL scaffold (BeaconLock.pas) is removed —
it was never in the control path.
- RadioController:
* Persist live: each correction folds straight into the active xvtr
LOError (visible in Settings, survives restart as LNB calibration);
disk writes throttled. FBeaconLockHz is now only a session indicator.
* Robust tracking vs nearby signals: narrow ±2 kHz gate while locked
(±6 kHz only for acquisition), slew-rate outlier rejection (a sudden
centroid jump = interferer, not slow LNB drift → ignored), and lobe
shape validation in MeasureBeaconFFT (width + power symmetry) so a CW
carrier / one-sided neighbour isn't mistaken for the BPSK beacon.
Prominence measured over the in-window noise floor (gate-width robust).
* Fast convergence: feed-forward (predict post-retune position so the
window follows the beacon through the jump) + near-deadbeat correction
on the manual click → one click locks instead of repeated tapping.
* Single central BPSK beacon (10489.750); dead CoarseBeaconOffset and
unused throttle counters removed; stale NCO/FLL/4 Hz comments fixed.
- WDSPEngine: drop the per-sample TBeaconTracker RX-IQ tap (tracker gone).
- MainForm: BEACON is now a plain button, shown only on Pluto in a
transverter. Lock status (off / click / search / LOCK + correction +
prominence) moves to status-bar field 7 in place of PLL on Pluto;
openHPSDR keeps PLL there.
- SettingsForm/StatusBar: widen LO Error field to ±10 MHz (QO-100 LNBs
drift hundreds of kHz) and widen status field 7 for the beacon text.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Click the beacon on the spectrum; the controller tracks it and continuously
trims the transverter LO so the whole downlink stays put as the LNB drifts.
- BeaconLock.pas: TBeaconTracker scaffold (narrowband NCO/FLL) — kept but no
longer in the control path (FLL diverged on the suppressed-carrier BPSK
beacon + Pluto DC offset). Measurement now uses the proven display-FFT path.
- RadioController: FBeaconLockHz folded into XvtrTranslate (on top of LOError).
MeasureBeaconFFT finds the beacon by POWER-WEIGHTED CENTROID of the lobe
(BPSK has a suppressed carrier → broad symmetric ~2.4 kHz lobe, not a line;
a peak-finder jitters, the centroid sits on the carrier). Track position in
ABSOLUTE display Hz (FBeaconTrackHz) so scrolling the waterfall/centre never
moves the search window off the beacon. Closed loop: e = tracked - ref,
d(e)/d(LockHz) = -1 -> LockHz += gain*e; settle cooldown after each correction
(display-FFT lags the LO retune -> avoids overshoot); deadband 75 Hz +
centroid/prominence smoothing + lock hysteresis for a steady lock.
Correction applied only after the user clicks (manual seed), so a crowded
band can't pull a neighbour to the reference.
- WDSPEngine: SetBeaconTracker + RX-IQ tap (tracker idle now, ~1 check/sample).
- SpectrumView + GL: beacon markers — green = reference (10489.750), orange =
tracked centroid.
- MainForm: BEACON button (RX block, XVTR-only). Flow: BEACON -> "CLICK BCN"
-> click beacon -> "L<corr> /<prom>". ServiceBeaconLock driven by MeterTimer.
Reference defaults to the middle BPSK beacon 10489.750. Tested on-air against
Es'hail-2: locks and holds, survives waterfall drag.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CTun position was lost on band restore / restart, and VHF/UHF bands were
never saved on Pluto.
- SaveCurrentBand: the >61 MHz guard (HPSDR HF-only) skipped saving native
Pluto VHF/UHF bands → 2m/70cm reverted to defaults. Now HPSDR-only; Pluto
saves VU-plan bands (FreqToBandIdx guards cross-band pollution).
- Persist DDC center for CTun: new TBandSettings.CenterHz (+ JSON center_hz)
and TXvtrEntry.LastCenterHz (+ last_center_hz). RestoreBand / ActivateXvtr
restore the saved center when CTun is on and the offset fits the span,
instead of forcing center := VFO (which re-centered the receiver).
- UpdateFreqDisplayMax: freq-display upper bound from active transverter's
FreqEnd (lets QO-100 show 10 GHz past the 6 GHz Pluto cap).
- QO-100 transverter template (slot 2, disabled): downlink 10489.5–10490.0,
LO 9750. MigrateXvtrTemplate injects it into the first free slot for
devices that already have a saved xvtr config (template was otherwise
masked by the loaded slots).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RX hw-gain (Pluto/AD936x): backend SetRxGain(ModeIdx, GainDb) — gain_control_mode
(manual/fast_attack/slow_attack/hybrid) + hardwaregain. Controller FRxGainMode/
FRxGainDb, commands SetRxGainMode/SetRxGain/RxGainBy, rfRxGain event, snapshot,
applied in StartRunning. Persisted per-device (rx_gain_mode/rx_gain_db). HPSDR
unaffected (backend no-op).
- UI: separate "RF AGC" panel below the (unchanged) WDSP AGC block, shown only for
Pluto — FAST/SLOW/HYB/MAN mode buttons + manual GAIN slider. LayoutLeftPanel
reflows lower panels via RelayoutBelowBands; no layout shift on HPSDR.
- Cold-init fix: direct sampling_frequency write doesn't load the AD9361 FIR
decimation filter, so a cold-booted Pluto showed a wide centre spike that didn't
track tuning (worked only after SDR Console pre-initialised it). Add optional
libad9361 binding (dynamic) and call ad9361_set_bb_rate() in ApplySampleRate,
which configures BBPLL + loads the FIR; falls back to direct write if absent.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add ADALM-Pluto / AD9361 support as a second hardware backend alongside
openHPSDR, sharing the WDSP DSP pipeline and the existing controller API
(UI stays decoupled from logic).
- RadioBackend.pas: abstract TRadioBackend + TBackendCaps + TRadioDevice
(Kind/URI/Serial). THPSDRNetwork now derives from it (state via virtual
getters); TRadioController.FNetwork is the base type.
- IIOBindings.pas: dynamic libiio loader (runs without libiio present).
- PlutoBackend.pas: scan/probe-by-URI, connect, LO/rate/bandwidth/gain
control, RX streaming thread (int16->24bit BE -> OnDDCIQ), Q conjugated
to match WDSP IQ convention. Verified on LibreSDR (AD9361) over network.
- Unified discovery: TDiscoverThread scans both backends; network Plutos
found via direct ProbeURI (no mDNS needed). ConnectDevice dispatches by
Dev.Kind (EnsureBackend swaps backend, preserving callbacks).
- DeviceStore/DeviceForm: persist Kind/URI/Serial; save Pluto via
AddSavedPluto so saved/autostart devices reconnect across restarts.
- VHF/UHF band plan (BoardUtils, kind-aware): 6m..ADS-B for Pluto; fixes
HF clamps (band detect, mouse-wheel 60 MHz cap, freq-display max).
- SampleRateOverlay: configurable presets (Pluto 576k..5760k, >520 ksps),
auto-width to fit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
FLastSMeter is sourced from WDSP (GetSMeterDBm), not the network HP-status,
so only the GUI timer (MainForm) ever updated it. In headless mode nothing
did, leaving PushState to send web clients a frozen -130 dBm. Refresh it in
the daemon Run loop before each PushState, mirroring the GUI timer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
1. StartRunning applied AGC mode via a raw enum cast (TWDSPAGCMode(FAGCMode))
instead of the index→enum table, inverting Fast↔Off on every connect/go-live
(GUI and daemon). Now uses ApplyAGCToEngine like the rest of the unit.
2. SetFilterIdx indexed the per-mode BW/deviation tables with an unchecked Idx
(FM tables hold only 2 entries) — out-of-bounds when driven from CAT/web.
Now clamps Idx per mode (EnsureRange).
3. ConnectDevice loaded FActiveVfo / FCurrentBand straight from config without
range validation; a corrupt/old blob could leave FCurrentBand invalid and
make later SetMode/SetFilterIdx write past FBandCache. Both now clamped.
4. VfoSwap did not run the bandstack DSP restore that SetActiveVfo does, so a
swap to a VFO on another band kept the old mode/filter/AGC while the band
button highlighted the new band. Now mirrors SetActiveVfo.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Without it Inno Setup skips files whose version matches the installed
one, so the exe was not replaced on updates.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
FPC's GetAppConfigDir on Windows falls back to the exe directory
if the shell API call fails, which breaks installs in Program Files.
Read %APPDATA% from the environment variable instead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Program Files is read-only for normal users; GetAppConfigDir(False)
returns the proper per-user config location on all platforms.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wires the new wdsp WFM API into the engine and adds a WFM preset to the
FM filter row (200 kHz BW / 75 kHz deviation). Also fixes WDSP_SAM
constant which was 12 — that slot is now RXA_WFM in the updated enum.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- ApplyChannel now sets TrkDrive from Ch.Power; saves pre-channel level in
FPreChannelPower (works around TrkDriveChange clearing the field on assignment)
- Power is restored when tuning away from channel (CheckChannelActive) or on
first VFO movement after returning to band with no active channel (ApplyVfoA)
- Manual drive slider move clears FPreChannelPower so restore is skipped
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New ChannelStore.pas: TChannel record + JSON persistence (channels.json)
- New ChannelsForm.pas: full channel editor (list + fields, pre-fills from current radio state)
- CH button in RX block: left-click opens dropdown, right-click opens editor
- Active channel: button highlights with channel name, deactivates on VFO move
- ApplyChannel: auto-switches XVTR/HF band based on channel frequency; saves old
band state before switching to prevent cache corruption
- SaveCurrentBand: skip save when VFO > 61 MHz (prevents HF cache corruption
from VHF channel application without XVTR)
- DeactivateXvtr: save full XVTR state (was only saving LastFreq)
- CTCSS/RPT from channel marked as auto: cleared automatically when tuning away
from channel frequency; survives band switches via FXvtrSettings auto-flags
- TXvtrEntry: add LastCTCSSAutoActive, LastFMRptAutoActive fields
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ew8bakandClaude Opus 4.8