Bidirectional Apache Labs Andromeda/G2 front-panel protocol on top of CAT.
Panel logic lives in dedicated units; existing files get only thin hooks.
New units:
- AndromedaMap.pas — data only: action enums + default button/encoder
layout tables and LED (ZZZI) numbers (mirroring the Thetis defaults)
- AndromedaPanel.pas — TAndromedaPanel: inbound panel events -> controller
actions (marshalled via Invoke), state subscription -> ZZZI push via SendProc
Hooks:
- CATEngine: parse ZZZD/ZZZU/ZZZE/ZZZP/ZZZS into generic TCATContext callbacks
- CATAdapter: creates the panel, routes engine callbacks to it, supplies the
SendProc to the Andromeda port, AddStateListener, ZZZS handshake
- CATSerial: Andromeda flag in port config + HasAndromeda/SendToAndromeda
- RadioController: AddStateListener (multicast, does not steal MainForm's
OnStateChanged)
- Settings/SettingsForm/MainForm: CATSerialAndromeda[0..3] + persistence + checkbox
First version: serial transport, hardcoded default mapping, LED indicators
(MOX/Tune/CTUN/VFO A-B/Split/NB/NR/SNB/ANF/Squelch). Doc: doc/ANDROMEDA.md.
TODO: default button mapping does not match the physical panel (hardcoded) —
to be fixed later; also ZZMF/LCD text, TCP G2V2 transport, configurable mapping.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Реализованы команды, ранее бывшие заглушками — функционал уже был в
TRadioController, но не пробрасывался в CAT:
- Split TX: ZZSP/FT/FR + split-байт в IF (новый RadioController.SetSplit)
- FM Squelch: SQ (0–255), ZZSQ (0–100%), ZZSO (on/off)
- FM CTCSS: CT/ZZTA (on), CN (1-based)/ZZTB (0-based тон)
- FM-репитер: OF (offset), OS (направление, с трансляцией Kenwood↔RPT_*)
- FM step: ZZST (00–03)
- CTUN: ZZCN; AGC-T/RF gain: ZZAR
- ANF: ZZNT (раньше ошибочно алиас NB)
- Шаги VFO: ZZAU/ZZBP (исправлен баг — были алиасы ZZFA/ZZAP), ZZSU
TCATContext расширен callback'ами (split, squelch, CTCSS, repeater, step,
AGC-T, CTUN); CATAdapter — геттеры/сеттеры/sync с маршалингом через Invoke.
Добавлен doc/CAT_STATUS.md — полный статус CAT и план работ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SyncWebConnect (web-коннект на десктопной GUI) собирал устройство сам
только из IP+BoardType, оставляя Kind=0 (=bkHPSDR) и пустые URI/Serial.
Из-за этого сохранённый Pluto подключался как openHPSDR → UDP discovery
→ Hardware Timeout (web при этом оптимистично показывал connected /
Unknown Board). Десктоп-путь и демон уже шли через ResolveDevice.
Теперь SyncWebConnect тоже зовёт FController.ResolveDevice(IP) —
единый резолв (восстанавливает Kind/URI/Serial/BoardType/MAC из стора
по IP или URI) для всех трёх входов.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Заменил дропдаун+слайдер на одну кнопку RF AGC (с подписью текущего
режима). По клику — оверлей (стиль как FNP-попап) с кнопками
FAST/SLOW/HYBRID/MANUAL + ползунок GAIN 0–73 дБ, активный только в
MANUAL. Крестик/клик мимо закрывают; выбор режима оставляет оверлей
открытым (чтобы сразу подвинуть слайдер). Бэкенд не тронут — те же
команды set_rx_gain_mode/set_rx_gain и state-поля. Только WebPageHtml.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Прокинул в web-интерфейс управление, которого там не хватало (раньше
только отображение):
- RF-AGC (Pluto hw-gain): дропдаун режима FAST/SLOW/HYB/MAN + слайдер
GAIN 0–73 дБ (активен только в MAN, драг переводит в manual). Виден
по BackendCaps.HasHWGain (= Pluto подключён). Команды set_rx_gain_mode
/ set_rx_gain → SetRxGainMode / SetRxGain.
- RX MUTE (QO-100 self-monitor): toggle-кнопка рядом с BCN, видна по
InQO100, подсветка по состоянию. Команда set_rx_mute → SetRxMuteOnTx.
Гейтинг зеркалит десктоп. Работает в GUI-web-сервере и headless-демоне.
Проверено на железе пользователем.
WebServer: команды + state-поля (rf_agc_visible/rx_gain_mode/rx_gain_db,
rx_mute_visible/rx_mute_on) + SetRxGainStatus/SetRxMuteStatus.
WebAdapter: колбэки OnRxGain*/OnRxMute (Invoke на поток контроллера) +
публикация в PushState. MainForm + ewsdrd.lpr: привязка колбэков.
WebPageHtml: виджеты, JS-обработчики, updRfAgc/updRxMute, PEND_MAP.
Также актуализирован doc/PLUTO_INTEGRATION_PLAN.md: TX-тракт и режим
QO-100 помечены проверенными на железе; раскрыт TODO «XO ppm-калибровка»
(ручной TxLOOffset как текущий обходной путь, xo_correction/GPSDO как
постоянное решение).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After tying the ruler font to the ruler height, the labels (drawn at a
fixed H/2-1 top) sat below center because the taller font extended
downward. Shorten the ticks (major H*0.34, minor H*0.20) and center the
label in the area beneath them using TextHeight, so the digits are
vertically centered at any DPI. Applies to both the normal grid and the
FM-step grid branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The ruler drew labels at a fixed Font.Size := 7, so on Windows display
scaling (125/150/200%) the text no longer matched the DPI-scaled ruler
height — labels came out too small or clipped. Tie the font height to
the ruler height (-Max(8, Round(H*0.45))) so labels scale with DPI,
matching the approach used by the new bandplan overlay.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a thin colored strip along the bottom of the spectrum (above the
ruler) showing the QO-100 narrow-band transponder bandplan: mode
segments (CW ONLY / NB DIGI / DIGI / SSB / MIXED MODES) plus the three
beacons (CW / PSK / EXP) as muted-red cells at their ranges.
- New unit BandPlanOverlay.pas (TBandPlanOverlay), modelled on
VfoOverlay: content rendered once into a cache bitmap, per-frame cost
is just a constant-alpha composite (CPU) / one textured quad (GL).
Cache invalidates only on view change (center/span/width) so it idles
while the QO-100 downlink display is static.
- Wired into both render paths: SpectrumView (CPU composite) and
SpectrumViewOpengl (texture, re-uploaded only when dirty).
- MainForm: SetView fed from SyncSpecViewFreq; visibility gated by
InQO100 (Pluto + full-duplex transponder), like RX MUTE / BEACON.
- DPI-robust: strip height scales with Screen.PixelsPerInch and the font
height is tied to the strip height (not point size), so labels always
fit at any Windows scaling.
- Segment/beacon frequencies and colors are a single editable table.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a per-operator toggle to hear your own downlink off the satellite
while transmitting (full-duplex self-monitor), and restrict QO-100-only
controls to the QO-100 mode.
- WDSPEngine: new MonitorRXDuringTX flag; audio gate becomes
`not FTXActive or (FKeepRXDuringTX and FMonitorRXDuringTX)` so RX audio
can pass to speakers during TX in full-duplex.
- Controller: FRxMuteOnTx (default True = mute RX on TX), SetRxMuteOnTx/
ApplyRxMuteToEngine, rfRxMuteOnTx notify; new InQO100 predicate
(Pluto + full-duplex XVTR slot) as the single gate for QO-100 UI.
- Settings: global RxMuteOnTx (rx_mute_on_tx, default True), persisted.
- MainForm: new RX MUTE button in TX panel next to DUP, visible only in
QO-100; BEACON button visibility tightened from "any transverter" to
InQO100 so it no longer shows in plain VHF/UHF modes.
- doc: plan updated (RF-AGC done, two temps, TX/RX locked split,
self-monitor, phase 6 done; remaining TODOs incl. web wiring).
Web intentionally left unchanged for now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pluto exposes two temperature sensors: the AD9361 transceiver
(ad9361-phy temp0/input, milli-°C) and the Zynq SoC/FPGA (xadc temp0,
raw+offset+scale → C = (raw+offset)*scale/1000). Only the former was
read. Now both are read and shown as "Temp 37/53C" (chip/SoC) in the
desktop status bar and web UI.
- ReadTelemetry gains an out SocTempC param (base + Pluto override);
Pluto reads xadc via the IIO context.
- Controller stores FLastPlutoSocTempC; SoC temp validated with a
plausibility window (no slew-limit — stable local sensor, unlike the
AD9361 sensor that spikes during mid-conversion).
- Status formatting handles one or both temps in MainForm and WebAdapter.
- Widen desktop status-bar field 3 (150→190) so both temps + RSSI fit;
web layout unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The PLL column (also used for QO-100 beacon status on Pluto) was
minmax(70px,90px), clipping "BCN LOCK 105Hz /7dB". Widen to
minmax(120px,185px), matching the desktop field-7 width. Frontend only.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the single tracked-beacon line with a filter band spanning the
beacon width, split into two halves (left/right Manchester lobes at
±400 Hz) with a central divider (carrier null) and band edges at
±450 Hz, matching the desktop dec-marker width. Reference frequency is
now a green dashed line. Frontend only (WebPageHtml).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror the desktop QO-100 beacon lock into the web interface and make it
work in the headless daemon.
Backend:
- WebServer: set_beacon/beacon_seed commands (+OnBeacon/OnBeaconSeed
events), beacon state fields, SetBeaconStatus, and beacon_visible/on/
text/ref_hz/track_hz in BuildStateJson. beacon_seed carries 'frac'
(0..1 click position); absolute Hz is computed controller-side from
live FCenterFreq/FSpanHz (mirrors desktop PixelToFreq).
- WebAdapter: OnBeacon->SetBeaconLock, OnBeaconSeed->BeaconSeedAtHz;
PushState mirrors compact status (matches MainForm.BeaconStatusText)
into the PLL status cell when visible (Pluto + active XVTR).
- MainForm/ewsdrd: wire the two callbacks.
- ewsdrd: call ServiceBeaconLock in the main loop @~10Hz (FRunning+
FWDSPReady gated). Without this the lock loop never ran headless.
Frontend (WebPageHtml):
- BCN button (visible only on Pluto+XVTR), highlighted while locked.
- Seed-on-mousedown with immediate return (like desktop FormMouseDown):
no drag/set_center so the gesture never moves the center / tears IQ.
Armed (first click after BCN) or Shift, mirroring desktop arm/Shift.
- PLL status cell shows beacon status (field-7 parity with desktop).
- Ref (green) + tracked (orange) beacon markers on spectrum/waterfall.
Known issue (unresolved): after lock the beacon can slowly drift off and
drop to "BCN sync". Suspected residual-sign anti-drift or retune-timing
on the web/daemon path; needs on-air diagnostics. See memory
project_web_beacon for the investigation state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless daemon never set the web server's FreqMhzDigits, so it
stayed at the constructor default (3 = up to 999 MHz) and VHF/UHF/SHF
frequencies didn't fit the web VFO display. The GUI mirrors this per-
device setting in ApplyFreqMhzDigits; the daemon now does the same on
connect (rfDevice) via PushFreqDigits, reading the value the controller
loaded into FLoadedGlobal.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fix: dragging/wheeling the spectrum in the web UI clamped frequency to a
hardcoded HF ceiling (vfoMax=60 MHz), so on Pluto VHF/UHF it snapped down
to 60 MHz and couldn't pan up (only the VFO wheel worked, via a different
limit). Push the backend's tuning range (BackendCaps.MinFreqHz/MaxFreqHz)
to the web alongside the band plan; JS vfoMin/vfoMax use freq_min/freq_max
from state. The transverter branch (XVTR_CUR>=0) is unchanged — it keeps
the wide-open range since the displayed RF freq is translated to IF and
clamped server-side.
Dead-code cleanup (audit of this session's work):
- SampleRateMode/TSampleRateMode: orphaned when the sample-rate
unification replaced the srmContinuous branch in ApplyBackendCapsToUI;
no readers left. Removed (+ now-unused PLUTO_MAX_SR).
- Pre-existing write-only/unused: TBackendCaps.MaxSampleRate,
SampleRateOverlay.SPAN_NAMES, MainForm.BAND_FREQ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Web band selector was hardcoded to the HF plan, so on Pluto it showed
160m..6m instead of the VHF/UHF plan and highlighted the wrong entry
(band switching itself already worked: web sends idx, controller maps it
via the IsPluto plan). Mirror the sample-rate unification.
Single source of truth = BoardUtils -> controller:
- BoardUtils: TBandInfo/TBandPlanArray + BuildBandPlan(Pluto).
- TRadioController.BandPlan returns BuildBandPlan(IsPluto).
Both UIs derive from it:
- Desktop already plan-aware (RelabelBands + RestoreBand) - unchanged.
- Web: WebServer.SetBands + "bands" in state JSON; hosts push
BandPlan on connect/startup; JS builds the band selector from
state.bands (BAND_N/BAND_F now dynamic).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Sample-rate (span) presets were duplicated in three places and none was
authoritative: HPSDR set hardcoded in the desktop overlay (SPAN_RATES),
Pluto set in backend caps, and a separate hardcoded list in the web JS.
The web showed HPSDR rates even on Pluto, and the web adapter silently
dropped any rate outside a hardcoded HPSDR whitelist (so Pluto-only rates
like 960k/2304k never switched).
Single source of truth = backend caps -> controller:
- HPSDRNetwork.Caps now fills RatePresets [48k..1536k] (was nil).
- RadioBackend: named type TBackendRateArray.
- TRadioController.SampleRatePresets returns BackendCaps.RatePresets.
Both UIs derive from it:
- Desktop: ApplyBackendCapsToUI always feeds the overlay from
SampleRatePresets (overlay no longer owns the HPSDR list).
- Web: WebServer.SetRatePresets + rate_presets in state JSON; hosts
(daemon OnState/startup, GUI ApplyBackendCapsToUI/startup) push
SampleRatePresets; JS builds span buttons dynamically from it.
- WebAdapter.SyncSpan validates against SampleRatePresets instead of a
hardcoded whitelist, so any backend rate is accepted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless daemon (ewsdrd) only ever built HPSDR devices, so Pluto
could not be used: backend is chosen by Dev.Kind and Pluto opens by URI,
neither of which the daemon propagated. Also local audio played on the
host and web Discover never probed network Plutos.
Shared, backend-agnostic helpers in TRadioController (used by GUI + daemon):
- ResolveDevice(IP): discovered->saved lookup restoring Kind/URI/Serial/
BoardType/MAC. MainForm.ResolveDevice now delegates here.
- AddSavedDevice(name, addr): web dev_add saves Pluto when addr has a URI
scheme (ip:/usb:/local:), else HPSDR. Both web hosts use it.
- SeedPlutoProbeFromSaved: seed network-probe URIs from saved Plutos
(no mDNS -> a network Pluto is only found by direct URI probe).
- LocalAudioEnabled flag (GUI=True): when False the local sound card is
neither opened nor written; RX audio goes only to web (OnAudioConsume).
DeviceStore.AutoStartDevice(out Dev): full autostart record (Kind/URI/
Serial) so a saved Pluto (URI-addressed, empty IPAddress on USB) can
autostart.
Daemon (ewsdrd.lpr): LocalAudioEnabled:=False; SyncConnect via
ResolveDevice; autostart via AutoStartDevice; SyncDiscover seeds probe
URIs then Discover; SyncDevAdd via AddSavedDevice.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Expose the QO-100 slot's LOError (Hz) on the QO-100 settings page,
placed right after LNB LO. Maps to Entries[QO100_SLOT].LOError — the
live LNB-drift calibration that the beacon lock folds its correction
into. Group height extended to 8 rows and the info label shifted down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the display-FFT centroid beacon lock with a decoder-based loop that
trims the active transverter's LOError from the beacon decoder's precise NCO
carrier estimate, compensating LNB drift so the whole downlink (incl. FT8)
stays put. Single BEACON button (lock = decoder). Also unifies the beacon
decoder filter marker between the CPU and OpenGL spectrum renderers.
Verified on air: lock holds, FT8 decodes cleanly.
The narrow beacon decoder filter marker rendered differently in the two
spectrum views: CPU drew a translucent filled band (BlendBand) plus a centre
line, while OpenGL drew three plain vertical lines (both edges + centre), so
it looked like one band on CPU and "two parts" on GL.
Make the CPU path draw the same three lines as GL — consistent look and
cheaper (drops the per-frame per-pixel alpha blend for this marker; BlendBand
is kept for the RX/TX passband shading).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the display-FFT centroid beacon lock with a decoder-based loop.
The beacon decoder already tracks the carrier precisely via its NCO
(squaring-FFT acquisition + Costas offload); its residual ResidHz+CarFreqHz
is an exact measurement of the beacon's offset from the aim point. Feed that
into LOError of the active transverter so the LO retunes to compensate LNB
drift — the whole downlink stays put, calibration persists.
RadioController:
- Remove MeasureBeaconFFT and all display-FFT lock state/constants
(lobe/search/track/slew/sym/shape/seed-gain/prom), fields
FBeaconManualSeed/FBeaconPromDB/FBeaconDecOn, methods
SetBeaconDecode/SetBeaconDecodeAtHz/BeaconDecodeEnabled.
- SetBeaconLock is now the master switch (lock = decoder); BeaconSeedAtHz
aims the decoder; ServiceBeaconLock measures beacon freq from the decoder
scope and trims LOError (gain 0.5, deadband 20 Hz, step clamp 400 Hz,
settle 8 ticks). Feed-forward of the aim keeps the decoder locked through
the retune (net baseband ~0). Lock/SNR now come from the decoder.
MainForm: single BEACON button — left-click toggles lock (+ opens the
constellation/bulletin scope, arms the spectrum click for aiming),
right-click shows/hides the scope. Spectrum click (armed or Shift) aims via
BeaconSeedAtHz. Simplified status field and markers.
Both targets build (lazbuild --ws=qt6 + build-ewsdrd.sh). Not yet verified
on air. Risk: BEACON_RESID_SIGN=+1.0 — flip to -1.0 if the loop runs away.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After successful on-air validation, drop the temporary diagnostics:
- IQ baseband dump to ~/ewsdr_beacon_iq.f32 (FDbgStream/DbgWrite2).
- BeaconLog file logger (~/ewsdr_beacon.log) and per-second STATE / AIM lines.
- Dead Gardner timing fields (FMidI/FMidQ/FHalf/FPrevI/FPrevQ), superseded by
the ML signal×slope TED.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Decode and show the AO-40 frame payload as text in the beacon scope window.
- RadioController.GetBeaconFrame exposes the latest 256-byte frame.
- BeaconScopeForm: poll the frame counter; on each new frame, parse the
payload (drop trailing 2-byte CRC, printable ASCII, 64-char lines, as in
gr-satellites qo100.parse) and append to a scrolling read-only memo.
- Window widened/heightened; constellation size capped to leave room.
Frame format verified offline against a real on-air capture: the decoder
produces the live QO-100 AMSAT bulletin text (RS errors=0).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Full chain now decodes the QO-100 central beacon to 256-byte AO-40 frames
on-air (frames>0, RS errors=0). Builds on M1 (stable BPSK demod).
FEC backend (BeaconFEC.pas, TBeaconFEC):
- AO-40 FEC: distributed sync (65 bit, step 80) -> 80x65 deinterleave ->
Viterbi r=1/2 k=7 -> CCSDS descramble -> 2x RS(160,128). Links system
libfec (Karn) load-time (libfec.so/.dll/.dylib). Viterbi AO-40 [0x4F,-0x6D]
remapped to libfec [0x6D,0x4F]. Validated against gr-satellites reference
vectors (fectest2: exact 256-byte frame, 0 mismatches).
DBPSK Manchester frontend (BeaconDecoder.pas):
- Chip-rate (800) processing: RRC matched filter -> ML signal-times-slope
timing recovery -> Costas -> Manchester combine (block phase select) ->
differential decode -> soft symbols to FEC.
- Carrier acquisition: squaring-FFT estimates the residual (carrier at +-pi/chip
defeats decision-directed Costas), one-shot pulls it to DC via residual NCO.
- Costas frequency offload into pre-RRC NCO (with deadband) tracks LNB drift
without hitting the +-pi Costas clamp.
- ML TED replaces Gardner, which degenerates on the Manchester chip stream.
Temporary on-air diagnostics retained (IQ dump + STATE log) pending wider
signal validation; to be removed before final cleanup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DUP toggle wrote FDisplayDuplex directly, bypassing the controller's
SetDuplex (which also sets KeepRXDuringTX live and fires rfDuplex). And
MainForm had no rfDuplex render case, so QO-100 auto-enabling duplex
(ActivateXvtr → SetDuplex) left the button unlit while FDisplayDuplex=True
— pressing DUP then turned it OFF when the user expected ON.
Single path now: ApplyDUP just calls SetDuplex; a new rfDuplex render case
styles the button and (when transmitting) switches the display source.
Both the button and QO-100 auto-enable go through it, so the button always
reflects state and KeepRXDuringTX stays in sync.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the TX-path work landed this session:
- §4.6: polyphase FIR interpolator + sample-rate-scaled TX buffer +
SoapyPlutoSDR confirmation of 32768 full-scale.
- §4.8 (new): power-linear drive→atten mapping, full WDSP digital level,
TX LO powerdown gated by PTT.
- Phase 4 status updated.
- Related fixes: per-band FM settings (SQL/CTCSS/step/repeater) restore on
startup — was dropped by LoadDevice; affects all backends.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TX LO (altvoltage1) is now powered down on RX and enabled on PTT, instead
of staying on continuously. Removes the TX carrier leakage that showed up
at the VFO frequency in the RX spectrum (and persisted after MOX), and
stops idle TX-LO radiation. ApplyTxLO sets powerdown from FTransmitting,
which also recovers the LO if external software (e.g. SDR Console) left it
powered down. RX LO (altvoltage0) is kept on — receive is continuous; QO-100
full-duplex still works (RX LO separate).
Trade-off: re-enabling the TX LO re-runs the AD9361 synth calibration
(a few ms), so the first syllable on SSB may be slightly clipped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
LoadDevice (bulk startup band loader) parsed only freq/mode/filter/AGC/
CTun/center/span and skipped the FM fields, while SaveBand writes them and
LoadBand reads them. So FM squelch, CTCSS, step and repeater shift were
saved on exit but reset to defaults on the next start (band switching kept
working — that path goes through the in-memory band cache, not disk).
Added the missing fmsq_on/fmsq_level/ctcss_on/ctcss_idx/fmstep_on/
fmstep_idx/fmrpt_dir/fmrpt_offset reads to LoadDevice, mirroring LoadBand.
Affects all backends, not just Pluto.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TUN produced no tone: TUNLevel default 10% mapped via the old dB-linear
attenuation curve (−89.75..ceiling) to −81.8 dB → effectively off. Now
power-linear: dB = ceiling + 20*log10(pct/100), so 10%→−30, 50%→−16,
100%→ceiling — usable across the whole slider.
Also keep WDSP digital level at full-scale for Pluto (ApplyWDSPDrive):
power is set once via hardware attenuation, not by scaling the WDSP path.
HPSDR unchanged (drive byte still drives the radio PA).
Note: at a given slider position Pluto TX is now much hotter than before
(50%: −49.9→−16 dB). Ceiling stays PlutoTxMaxAttDb (default −10 dB).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replaced linear interpolation upsampling (192k→device-rate) with a
polyphase FIR interpolator ×L. Prototype: windowed-sinc lowpass (Blackman,
~-58 dB sidelobes), TAPS*L long, cutoff TX_FIR_CUT=40k, normalized to unity
per-phase DC gain (loudness unchanged). Images at multiples of 192k are now
suppressed ~-58 dB instead of only sinc², cleaning up the uplink spectrum.
BuildTxResampler designs coefficients per FTxRatio in StartTX; FTxDlI/Q
delay line persists across SendDUCIQ calls, reset on StartTX/ClearDUCIQQueue.
Removed FTxPrevI/Q.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fixed 4096-pair TX buffer was too small for full-duplex above ~1 Msps
("not enough ... samples getting dropped" per SoapyPlutoSDR), causing
clicks/dropouts. Now sized as round(rate/60) rounded up to a power of 2,
clamped [4096..65536] (576k→16384, 1536k→32768). FIFO cushion (~4 buffers)
resizes to match in StartTX.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
QO-100 reuses the transverter path (VFO/band-stack/beacon-lock untouched)
with a split LO for the geostationary transponder:
- TXvtrEntry += FullDuplexTx + TxLOOffset (persisted). Reserve the last
XVTR slot (QO100_SLOT) for QO-100; migration restores the template when
the slot is unset or has empty offsets (fixes old configs showing zeros).
- XvtrTranslateTX: TX LO = visible - TxLOOffset (no LNB LOError) for QO-100;
identical to RX translate for normal transverters. Switched all TX-side
translate calls (controller + MainForm).
- SetDuplex wired (live KeepRXDuringTX); auto display-duplex on QO-100 entry.
- New "QO-100" settings page (LNB LO / transponder offset / downlink edges /
RX gain / TX ceiling + live RX-IF/TX readout); QO slot hidden from the
transverter table. Reuses OnXvtrChange — no MainForm wiring needed.
- doc/PLUTO_INTEGRATION_PLAN.md: phase 5 done.
Builds clean (headless + qt6 GUI). Not yet verified on hardware.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Show current drive value next to the slider: percent for openHPSDR,
TX attenuation in dB for Pluto (via controller PlutoTxAttForDrive;
unit flips on backend connect). Refreshed on drive change, device
render, and TX max-att change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Status bar / web now show Pluto/LibreSDR model + serial instead of
"Unknown Board" (BoardDisplayName in controller; UI just renders it).
- Field 3 shows AD936x chip temperature + RX RSSI for Pluto (no PA →
Supply only for openHPSDR). Polled via backend.ReadTelemetry (~2 Hz),
filtered for sensor glitches (plausibility window + slew-limit, with
anti-stick) — fixes rare bogus -15°C readings.
- Add libiio binding iio_channel_attr_read_double.
- Remove stale root pluto_integration.MD (superseded by
doc/PLUTO_INTEGRATION_PLAN.md).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Builds on the beacon-lock baseline: keeps the proven display-FFT control
path (hardware-LO trim folded into the active transverter LOError), and
hardens it. The narrowband NCO/FLL scaffold (BeaconLock.pas) is removed —
it was never in the control path.
- RadioController:
* Persist live: each correction folds straight into the active xvtr
LOError (visible in Settings, survives restart as LNB calibration);
disk writes throttled. FBeaconLockHz is now only a session indicator.
* Robust tracking vs nearby signals: narrow ±2 kHz gate while locked
(±6 kHz only for acquisition), slew-rate outlier rejection (a sudden
centroid jump = interferer, not slow LNB drift → ignored), and lobe
shape validation in MeasureBeaconFFT (width + power symmetry) so a CW
carrier / one-sided neighbour isn't mistaken for the BPSK beacon.
Prominence measured over the in-window noise floor (gate-width robust).
* Fast convergence: feed-forward (predict post-retune position so the
window follows the beacon through the jump) + near-deadbeat correction
on the manual click → one click locks instead of repeated tapping.
* Single central BPSK beacon (10489.750); dead CoarseBeaconOffset and
unused throttle counters removed; stale NCO/FLL/4 Hz comments fixed.
- WDSPEngine: drop the per-sample TBeaconTracker RX-IQ tap (tracker gone).
- MainForm: BEACON is now a plain button, shown only on Pluto in a
transverter. Lock status (off / click / search / LOCK + correction +
prominence) moves to status-bar field 7 in place of PLL on Pluto;
openHPSDR keeps PLL there.
- SettingsForm/StatusBar: widen LO Error field to ±10 MHz (QO-100 LNBs
drift hundreds of kHz) and widen status field 7 for the beacon text.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Click the beacon on the spectrum; the controller tracks it and continuously
trims the transverter LO so the whole downlink stays put as the LNB drifts.
- BeaconLock.pas: TBeaconTracker scaffold (narrowband NCO/FLL) — kept but no
longer in the control path (FLL diverged on the suppressed-carrier BPSK
beacon + Pluto DC offset). Measurement now uses the proven display-FFT path.
- RadioController: FBeaconLockHz folded into XvtrTranslate (on top of LOError).
MeasureBeaconFFT finds the beacon by POWER-WEIGHTED CENTROID of the lobe
(BPSK has a suppressed carrier → broad symmetric ~2.4 kHz lobe, not a line;
a peak-finder jitters, the centroid sits on the carrier). Track position in
ABSOLUTE display Hz (FBeaconTrackHz) so scrolling the waterfall/centre never
moves the search window off the beacon. Closed loop: e = tracked - ref,
d(e)/d(LockHz) = -1 -> LockHz += gain*e; settle cooldown after each correction
(display-FFT lags the LO retune -> avoids overshoot); deadband 75 Hz +
centroid/prominence smoothing + lock hysteresis for a steady lock.
Correction applied only after the user clicks (manual seed), so a crowded
band can't pull a neighbour to the reference.
- WDSPEngine: SetBeaconTracker + RX-IQ tap (tracker idle now, ~1 check/sample).
- SpectrumView + GL: beacon markers — green = reference (10489.750), orange =
tracked centroid.
- MainForm: BEACON button (RX block, XVTR-only). Flow: BEACON -> "CLICK BCN"
-> click beacon -> "L<corr> /<prom>". ServiceBeaconLock driven by MeterTimer.
Reference defaults to the middle BPSK beacon 10489.750. Tested on-air against
Es'hail-2: locks and holds, survives waterfall drag.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CTun position was lost on band restore / restart, and VHF/UHF bands were
never saved on Pluto.
- SaveCurrentBand: the >61 MHz guard (HPSDR HF-only) skipped saving native
Pluto VHF/UHF bands → 2m/70cm reverted to defaults. Now HPSDR-only; Pluto
saves VU-plan bands (FreqToBandIdx guards cross-band pollution).
- Persist DDC center for CTun: new TBandSettings.CenterHz (+ JSON center_hz)
and TXvtrEntry.LastCenterHz (+ last_center_hz). RestoreBand / ActivateXvtr
restore the saved center when CTun is on and the offset fits the span,
instead of forcing center := VFO (which re-centered the receiver).
- UpdateFreqDisplayMax: freq-display upper bound from active transverter's
FreqEnd (lets QO-100 show 10 GHz past the 6 GHz Pluto cap).
- QO-100 transverter template (slot 2, disabled): downlink 10489.5–10490.0,
LO 9750. MigrateXvtrTemplate injects it into the first free slot for
devices that already have a saved xvtr config (template was otherwise
masked by the loaded slots).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RX hw-gain (Pluto/AD936x): backend SetRxGain(ModeIdx, GainDb) — gain_control_mode
(manual/fast_attack/slow_attack/hybrid) + hardwaregain. Controller FRxGainMode/
FRxGainDb, commands SetRxGainMode/SetRxGain/RxGainBy, rfRxGain event, snapshot,
applied in StartRunning. Persisted per-device (rx_gain_mode/rx_gain_db). HPSDR
unaffected (backend no-op).
- UI: separate "RF AGC" panel below the (unchanged) WDSP AGC block, shown only for
Pluto — FAST/SLOW/HYB/MAN mode buttons + manual GAIN slider. LayoutLeftPanel
reflows lower panels via RelayoutBelowBands; no layout shift on HPSDR.
- Cold-init fix: direct sampling_frequency write doesn't load the AD9361 FIR
decimation filter, so a cold-booted Pluto showed a wide centre spike that didn't
track tuning (worked only after SDR Console pre-initialised it). Add optional
libad9361 binding (dynamic) and call ad9361_set_bb_rate() in ApplySampleRate,
which configures BBPLL + loads the FIR; falls back to direct write if absent.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add ADALM-Pluto / AD9361 support as a second hardware backend alongside
openHPSDR, sharing the WDSP DSP pipeline and the existing controller API
(UI stays decoupled from logic).
- RadioBackend.pas: abstract TRadioBackend + TBackendCaps + TRadioDevice
(Kind/URI/Serial). THPSDRNetwork now derives from it (state via virtual
getters); TRadioController.FNetwork is the base type.
- IIOBindings.pas: dynamic libiio loader (runs without libiio present).
- PlutoBackend.pas: scan/probe-by-URI, connect, LO/rate/bandwidth/gain
control, RX streaming thread (int16->24bit BE -> OnDDCIQ), Q conjugated
to match WDSP IQ convention. Verified on LibreSDR (AD9361) over network.
- Unified discovery: TDiscoverThread scans both backends; network Plutos
found via direct ProbeURI (no mDNS needed). ConnectDevice dispatches by
Dev.Kind (EnsureBackend swaps backend, preserving callbacks).
- DeviceStore/DeviceForm: persist Kind/URI/Serial; save Pluto via
AddSavedPluto so saved/autostart devices reconnect across restarts.
- VHF/UHF band plan (BoardUtils, kind-aware): 6m..ADS-B for Pluto; fixes
HF clamps (band detect, mouse-wheel 60 MHz cap, freq-display max).
- SampleRateOverlay: configurable presets (Pluto 576k..5760k, >520 ksps),
auto-width to fit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
FLastSMeter is sourced from WDSP (GetSMeterDBm), not the network HP-status,
so only the GUI timer (MainForm) ever updated it. In headless mode nothing
did, leaving PushState to send web clients a frozen -130 dBm. Refresh it in
the daemon Run loop before each PushState, mirroring the GUI timer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
1. StartRunning applied AGC mode via a raw enum cast (TWDSPAGCMode(FAGCMode))
instead of the index→enum table, inverting Fast↔Off on every connect/go-live
(GUI and daemon). Now uses ApplyAGCToEngine like the rest of the unit.
2. SetFilterIdx indexed the per-mode BW/deviation tables with an unchecked Idx
(FM tables hold only 2 entries) — out-of-bounds when driven from CAT/web.
Now clamps Idx per mode (EnsureRange).
3. ConnectDevice loaded FActiveVfo / FCurrentBand straight from config without
range validation; a corrupt/old blob could leave FCurrentBand invalid and
make later SetMode/SetFilterIdx write past FBandCache. Both now clamped.
4. VfoSwap did not run the bandstack DSP restore that SetActiveVfo does, so a
swap to a VFO on another band kept the old mode/filter/AGC while the band
button highlighted the new band. Now mirrors SetActiveVfo.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Without it Inno Setup skips files whose version matches the installed
one, so the exe was not replaced on updates.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
FPC's GetAppConfigDir on Windows falls back to the exe directory
if the shell API call fails, which breaks installs in Program Files.
Read %APPDATA% from the environment variable instead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Program Files is read-only for normal users; GetAppConfigDir(False)
returns the proper per-user config location on all platforms.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wires the new wdsp WFM API into the engine and adds a WFM preset to the
FM filter row (200 kHz BW / 75 kHz deviation). Also fixes WDSP_SAM
constant which was 12 — that slot is now RXA_WFM in the updated enum.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- ApplyChannel now sets TrkDrive from Ch.Power; saves pre-channel level in
FPreChannelPower (works around TrkDriveChange clearing the field on assignment)
- Power is restored when tuning away from channel (CheckChannelActive) or on
first VFO movement after returning to band with no active channel (ApplyVfoA)
- Manual drive slider move clears FPreChannelPower so restore is skipped
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New ChannelStore.pas: TChannel record + JSON persistence (channels.json)
- New ChannelsForm.pas: full channel editor (list + fields, pre-fills from current radio state)
- CH button in RX block: left-click opens dropdown, right-click opens editor
- Active channel: button highlights with channel name, deactivates on VFO move
- ApplyChannel: auto-switches XVTR/HF band based on channel frequency; saves old
band state before switching to prevent cache corruption
- SaveCurrentBand: skip save when VFO > 61 MHz (prevents HF cache corruption
from VHF channel application without XVTR)
- DeactivateXvtr: save full XVTR state (was only saving LastFreq)
- CTCSS/RPT from channel marked as auto: cleared automatically when tuning away
from channel frequency; survives band switches via FXvtrSettings auto-flags
- TXvtrEntry: add LastCTCSSAutoActive, LastFMRptAutoActive fields
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add PanelRXBlock between TX and Band with CTUN, VOL, NR/NB/SNB/ANF/MUTE
- Move AGC panel to sit directly below RX block for logical RX grouping
- Move DUP button into TX panel below MOX/TUN
- Rename PanelRX → PanelAGC to match its content
- Standardize block label top (2px) and first-control top (16px) across all
panels: AGC, SQL, CTCSS, STEP were inconsistent
- Fix left panel width restore after hide: save actual DPI-scaled width before
zeroing instead of hardcoding 232, preventing panel truncation on Win32 with
display scaling enabled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
(ClickFreq div StepHz)*StepHz always snapped downward; replaced with
((ClickFreq + StepHz/2) div StepHz)*StepHz so clicks above the midpoint
between two steps correctly snap to the higher one.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
RefreshAudioDevices was firing OnRXDevChange/OnTXDevChange when restoring
the combo selection, which called ApplyAudioDevice(-1,'') and wiped
FAudioOutDevName/FAudioInDevName before LoadValues could use them.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Extract helpers out of MainForm into structured modules:
- BoardUtils: BoardTypeName, FreqToBandIdx (removes duplication with DeviceForm)
- WisdomBuilder: TWisdomBuildThread + TWisdomProgressDialog
- UISync: TDeviceFoundSync/TStatusUISync/TDDCSeqSync via callbacks
- PlatformUtils: HasOpenGLSpectrumSwitch, CurrentScreenDPI
Minor cleanup: unused local constants, stale comments in AudioOutput.
Replaces TProgressBar in TWisdomProgressDialog with TFlatProgressBar,
drawn entirely via Canvas (plain rectangle, no native widget styling).
Dialog now receives the active TAppTheme so both dark and light themes
are applied consistently to background, label, and progress bar.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- LFM: Position = poDesigned (was poScreenCenter, overriding our restore)
- RestoreWindowBounds: remove position scaling (L,T invariant across DPI);
scale size correctly per backend: LCLWin32 uses CurDPI/SavedDPI (physical px),
Qt6/GTK/Cocoa use SavedDPI/CurDPI (logical px, inverse); fix min-size
inflation on Qt6 (was MulDiv(900,DPI,96) which exceeds logical screen width
at 150%+ scale, forcing window to 0,0)
- SaveWindowBounds moved from FormDestroy to FormClose while window is still
stable; add guard for bogus RestoredLeft/Top values on Qt6 when maximized
- RestoreWindowBounds stores FRestoreL/T and re-applies position in AfterShowTick
(200ms after show) when WM frame extents are already known to Qt, fixing the
systematic right/down drift caused by unknown frame extents at FormCreate time
- Save and restore WindowState (maximized flag); skip AfterShowTick position
re-apply when window is maximized
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove ResizeSMeter (Pango font measurement + multiple SetBounds) from 60 Hz timer tick;
it is still called on actual resize events
- Throttle UpdateAGCLines WDSP API calls from 60 Hz to ~10 Hz (every 6 ticks)
- Optimize spectrum alpha-fix loop: write-only byte access instead of read-modify-write DWORD
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SpectrumView: rewrite DrawSpectrumGradient to blend directly into
FSpectrumBitmap via ScanLine instead of TLazIntfImage+BitBlt (stale DC
on win32). Add alpha=$FF fixup pass so pf32bit Canvas.Draw renders via
StretchBlt not AlphaBlend. Remove FSpecGradImg/FSpecGradBmp fields.
MainForm: mask exZeroDivide/exInvalidOp in FormCreate so WDSP DLL
divide-by-zero does not crash the DSP thread on win32 (Qt6 already
masks FPU exceptions globally).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add SampleRateOverlay.pas: TCustomControl overlay (top-left of spectrum)
with hide-panel button and 6 span buttons (48k–1536k), same hit-test
pattern as VfoOverlay
- Consolidate toolbar: move PanelTopVfoGroup and PanelSMeterRight into
PanelToolbar (height 72) instead of floating on the form
- Remove PanelSpanButtons (alTop spacer) that caused the ~1cm black strip
at the top of the spectrum
- Add separator line inside PanelToolbar anchored to its bottom edge,
with 16px left/right margins
- Fix left panel blocks starting Y offset (was 38, now 0)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
AGC button in DSP row shows current mode (FAST/MED/SLOW/LONG/OFF).
Click toggles a picker row below; selecting a mode closes it, fires
OnAGCChange, and syncs MainForm BtnAGCMode buttons and DSP engine.
Overlay height expands 136→159 px while picker is open.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ew8bakandClaude Opus 4.8