Share one button paint routine: extract TFlatButton.Paint into
PaintFlatButton(canvas, rect, colors) and call it from both TFlatButton
and VfoOverlay.DrawButton — flag buttons now render identically to the
left panel (flat fill + border, no gloss), using theme Btn* colors.
Theme the whole flag card: the structural CLR_* palette (card bg,
border, text, dim, accents, freq, meter bg) is now derived from the
active TAppTheme via ApplyThemeColors, so flags follow light/dark like
the rest of the UI. Status accents (TX/SPLIT) stay fixed on purpose and
use a fixed dark text over their bright badges. Theme is pushed to
flags from ApplyDarkTheme and on creation via WireOverlayEvents.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Manual TextWidth/TextHeight centering pushed the glyph up-left on the
substituted monospace font (Linux). Let the widgetset center it with a
taCenter/tlCenter TTextStyle, fixing the A/×/SPLIT/TX badges.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flags (A + B+) now lay out in one pass: each sits beside its own filter
band as before, but a left neighbour pushes the next flag right so they
never cross (forward pack + backward pull-in on right-edge overflow).
LayoutFlags replaces the per-flag positioning; PositionVfoOverlay/
PositionSliceFlags are thin wrappers.
Identity is shown by a letter drawn at the top of each filter band in
the spectrum (both CPU + GL renderers), so a flag pushed away from its
band is still traceable. Letters and the flag letter-badge share one
per-slice palette (SliceColor); F is violet, not red, to avoid clashing
with the TX indicator.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Slice flags (B+) were staggered by i*12 which barely helped with the
96px-tall card and looked untidy. Put every flag — main A and slices —
on one row. Overlap of near-frequency flags to be handled next (leader
lines).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Independent RX slices sharing one panadapter: each has its own
freq/mode/filter/AGC/NR-NB-SNB-ANF, S-meter, volume and sound card.
VFO A = main receiver; B+ are soft fan-out WDSP channels within the
captured span (ideal for Pluto/QO-100; HW DDC path is Stage 3).
- WDSPEngine: soft fan-out (TSliceChan, ProcessSlices in DSP thread,
per-slice NCO/mode/filter/AGC/NR/NB/SNB/ANF + S-meter, OnSliceAudio),
FSliceLock serialises add/remove/set vs DSP; reopened on rate change.
- RadioController: TCtrlSlice with its own TAudioOutput/device,
Add/Remove/SetSlice*, RefreshSliceShifts keeps slices on target Hz
across centre changes. Slice letters start at 'B' (A = main receiver).
- UI: per-slice flags (VfoOverlay) with letter badge/close, filter-band
markers in BOTH GL and CPU renderers, drag-retune, wheel; flags placed
beside the filter band with flip, like the main flag. Ctrl+click adds.
- Main flag (slice A) visible whenever the left panel is hidden OR any
slice exists; synced with panel-driven DSP/mode/AGC changes.
- Perf: S-meter decoupled from flag chrome cache (FMeterDirty +
meter-only RefreshMeter via EnsureRendered); InvalidateVfoOverlay
avoids global overlay-cache churn on meter ticks.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Список устройств вывода ограничен AUD_MAX_VIS=6 видимыми строками — панель
больше не растёт бесконечно и не уезжает за низ спектра. При большем числе
устройств справа появляется полоса прокрутки ▲/▼ (строки сужаются под
колонку стрелок), клик листает FAudScroll не закрывая панель; стрелки гаснут
на краях. ≤6 устройств — как раньше, без стрелок.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DrawButton теперь рисует стеклянную кнопку как ползунок зум-бара: тёмная
скруглённая база-фаска + вертикальный глянцевый градиент (ярче вверху,
темнее внизу) + блик сверху и тень снизу. Хелпер GlossColor масштабирует
яркость цвета. Только при ребилде кэша — CPU-паритет сохранён.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TX-индикатор теперь кликабельный (хит HIT_TX → колбэк OnTxSelect) — задел
под выбор TX-слайса в мультислайсах. Три состояния цвета:
- передача идёт → красный;
- слайс выбран для TX → янтарный (CLR_TX_SEL);
- не выбран → нейтральный.
Новое состояние FTxSel прокидывается через SetExtState (пока True — один
слайс всегда TX-слайс). MainForm.OnVfoOverlayTxSelect — заглушка с TODO под
мультислайсы.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PositionVfoOverlay считает обе кромки полосы фильтра и ставит накладку справа
от неё по умолчанию; если справа не влезает (маркер у правого края) — рисует
слева от левой кромки. Возврат на правую сторону автоматически, когда снова
помещается. Убран прежний clamp-оверлап с маркером.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- S-метр: убрана метка +60 (вылезала за правый край), шрифт подписей
5→7 (читаемость), подписи сдвинуты ниже тика. Бар оставлен компактным,
ряду добавлено 3px под крупные метки.
- Градиент S-метра привязан к уровню dBm (S1→S7→S9→S9+18), а не к длине
бара — сильные сигналы уходят в красный раньше.
- Бейджи A/SPLIT/TX: высота 15→12px (верх на месте, низ приподнят) —
текст по центру, больше зазор до S-метра.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Полный редизайн накладки поверх спектра: шапка (слайс-бейдж A/B, ширина
фильтра, кликабельный SPLIT, индикатор TX), метр-ряд (индикаторы NR/NB/ANF/
SNB + сигнал-бар), крупная частота + S, нижний бар с fly-out пикерами.
- Fly-out движок MODE/DSP/AUD (раскрываются под баром, карточка растёт):
MODE — сетка режимов 4×2 + фильтры; DSP — NR/NB/SNB/ANF + AGC; AUD —
выбор аудио-устройства вывода (задел под слайсы).
- Слайдер громкости (click+drag) + mute; SPLIT-toggle; live TX-индикатор.
- Все контролы подключены к RadioController (SetVolume/ToggleMute/SetSplit/
EnumOutputDevices→ApplyAudioDevice); wire в MainForm + HandleMouseUp, чтобы
клик по накладке не уходил в спектр.
- FormatFreq на Int64 (double накапливал ошибку в десятки Гц на ~10 ГГц QO-100).
- S-метр ниже по высоте + плавный градиент по уровню dBm: тёмно-зелёный→
зелёный→жёлтый→красный (красный к ~S9+18).
- Кэш+dirty рендер сохранён (CPU-паритет со старой накладкой), GL-путь через
DrawOverlayBitmap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Зум был per-band только для HF (TBandSettings). XVTR-слоты хранятся отдельно
(TXvtrEntry) и зум туда не попадал — при входе в трансвертер не восстанавливался.
- TXvtrEntry: LastZoomFactor/LastPanSlider + Default/Load/Save (JSON).
- SaveCurrentBand (XVTR-ветка): пишет зум/пан в слот.
- ActivateXvtr: восстанавливает зум слота + SetZoomPan (re-arm анализатора).
Покрывает все входы (кнопка, старт по LastXvtr, CAT/web).
- ApplyZoom: кэширует в активный слот — XVTR при активном трансверторе,
иначе HF-band.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Button/encoder indices follow Thetis MakeNewAndromedaDataset (our 0-based
index = Thetis Number - 1), verified against andromeda_test/AndDecode.pas.
The old map assumed sequential 0,1,2.. and truncated at 32; the real panel
sends sparse indices up to 47.
- AndromedaMap: AND_MAX_BUTTONS 32->48, renumbered button/encoder tables;
new actions abVFOAtoB/abVFOBtoA/abVFOLock/abStartStop/abShift.
- RadioController: VFO Lock (FVfoLock, rfVfoLock, SetVfoLock, gate in
TuneActiveBy).
- AndromedaPanel: wire A>B/B>A/SDR-ON/Lock; Shift band-keypad layer
(#28 latch, #29..39 -> SetBand 160m..6m, non-sticky); aiVFOLock/aiShift
indicators.
- Filter High/Low (#4/#5) left as width approximation per decision.
- doc/ANDROMEDA.md updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bidirectional Apache Labs Andromeda/G2 front-panel protocol on top of CAT.
Panel logic lives in dedicated units; existing files get only thin hooks.
New units:
- AndromedaMap.pas — data only: action enums + default button/encoder
layout tables and LED (ZZZI) numbers (mirroring the Thetis defaults)
- AndromedaPanel.pas — TAndromedaPanel: inbound panel events -> controller
actions (marshalled via Invoke), state subscription -> ZZZI push via SendProc
Hooks:
- CATEngine: parse ZZZD/ZZZU/ZZZE/ZZZP/ZZZS into generic TCATContext callbacks
- CATAdapter: creates the panel, routes engine callbacks to it, supplies the
SendProc to the Andromeda port, AddStateListener, ZZZS handshake
- CATSerial: Andromeda flag in port config + HasAndromeda/SendToAndromeda
- RadioController: AddStateListener (multicast, does not steal MainForm's
OnStateChanged)
- Settings/SettingsForm/MainForm: CATSerialAndromeda[0..3] + persistence + checkbox
First version: serial transport, hardcoded default mapping, LED indicators
(MOX/Tune/CTUN/VFO A-B/Split/NB/NR/SNB/ANF/Squelch). Doc: doc/ANDROMEDA.md.
TODO: default button mapping does not match the physical panel (hardcoded) —
to be fixed later; also ZZMF/LCD text, TCP G2V2 transport, configurable mapping.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Реализованы команды, ранее бывшие заглушками — функционал уже был в
TRadioController, но не пробрасывался в CAT:
- Split TX: ZZSP/FT/FR + split-байт в IF (новый RadioController.SetSplit)
- FM Squelch: SQ (0–255), ZZSQ (0–100%), ZZSO (on/off)
- FM CTCSS: CT/ZZTA (on), CN (1-based)/ZZTB (0-based тон)
- FM-репитер: OF (offset), OS (направление, с трансляцией Kenwood↔RPT_*)
- FM step: ZZST (00–03)
- CTUN: ZZCN; AGC-T/RF gain: ZZAR
- ANF: ZZNT (раньше ошибочно алиас NB)
- Шаги VFO: ZZAU/ZZBP (исправлен баг — были алиасы ZZFA/ZZAP), ZZSU
TCATContext расширен callback'ами (split, squelch, CTCSS, repeater, step,
AGC-T, CTUN); CATAdapter — геттеры/сеттеры/sync с маршалингом через Invoke.
Добавлен doc/CAT_STATUS.md — полный статус CAT и план работ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
external FEC_LIB on the function decls alone does not register the
library with ld on FPC/Darwin — viterbi27/rs_8 symbols stayed
undefined at link time. Mirror the working WDSP pattern ({$linklib
wdsp}). This is not static linking: ld prefers libfec.dylib over .a
when both are in the search path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SyncWebConnect (web-коннект на десктопной GUI) собирал устройство сам
только из IP+BoardType, оставляя Kind=0 (=bkHPSDR) и пустые URI/Serial.
Из-за этого сохранённый Pluto подключался как openHPSDR → UDP discovery
→ Hardware Timeout (web при этом оптимистично показывал connected /
Unknown Board). Десктоп-путь и демон уже шли через ResolveDevice.
Теперь SyncWebConnect тоже зовёт FController.ResolveDevice(IP) —
единый резолв (восстанавливает Kind/URI/Serial/BoardType/MAC из стора
по IP или URI) для всех трёх входов.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Заменил дропдаун+слайдер на одну кнопку RF AGC (с подписью текущего
режима). По клику — оверлей (стиль как FNP-попап) с кнопками
FAST/SLOW/HYBRID/MANUAL + ползунок GAIN 0–73 дБ, активный только в
MANUAL. Крестик/клик мимо закрывают; выбор режима оставляет оверлей
открытым (чтобы сразу подвинуть слайдер). Бэкенд не тронут — те же
команды set_rx_gain_mode/set_rx_gain и state-поля. Только WebPageHtml.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Прокинул в web-интерфейс управление, которого там не хватало (раньше
только отображение):
- RF-AGC (Pluto hw-gain): дропдаун режима FAST/SLOW/HYB/MAN + слайдер
GAIN 0–73 дБ (активен только в MAN, драг переводит в manual). Виден
по BackendCaps.HasHWGain (= Pluto подключён). Команды set_rx_gain_mode
/ set_rx_gain → SetRxGainMode / SetRxGain.
- RX MUTE (QO-100 self-monitor): toggle-кнопка рядом с BCN, видна по
InQO100, подсветка по состоянию. Команда set_rx_mute → SetRxMuteOnTx.
Гейтинг зеркалит десктоп. Работает в GUI-web-сервере и headless-демоне.
Проверено на железе пользователем.
WebServer: команды + state-поля (rf_agc_visible/rx_gain_mode/rx_gain_db,
rx_mute_visible/rx_mute_on) + SetRxGainStatus/SetRxMuteStatus.
WebAdapter: колбэки OnRxGain*/OnRxMute (Invoke на поток контроллера) +
публикация в PushState. MainForm + ewsdrd.lpr: привязка колбэков.
WebPageHtml: виджеты, JS-обработчики, updRfAgc/updRxMute, PEND_MAP.
Также актуализирован doc/PLUTO_INTEGRATION_PLAN.md: TX-тракт и режим
QO-100 помечены проверенными на железе; раскрыт TODO «XO ppm-калибровка»
(ручной TxLOOffset как текущий обходной путь, xo_correction/GPSDO как
постоянное решение).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After tying the ruler font to the ruler height, the labels (drawn at a
fixed H/2-1 top) sat below center because the taller font extended
downward. Shorten the ticks (major H*0.34, minor H*0.20) and center the
label in the area beneath them using TextHeight, so the digits are
vertically centered at any DPI. Applies to both the normal grid and the
FM-step grid branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The ruler drew labels at a fixed Font.Size := 7, so on Windows display
scaling (125/150/200%) the text no longer matched the DPI-scaled ruler
height — labels came out too small or clipped. Tie the font height to
the ruler height (-Max(8, Round(H*0.45))) so labels scale with DPI,
matching the approach used by the new bandplan overlay.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a thin colored strip along the bottom of the spectrum (above the
ruler) showing the QO-100 narrow-band transponder bandplan: mode
segments (CW ONLY / NB DIGI / DIGI / SSB / MIXED MODES) plus the three
beacons (CW / PSK / EXP) as muted-red cells at their ranges.
- New unit BandPlanOverlay.pas (TBandPlanOverlay), modelled on
VfoOverlay: content rendered once into a cache bitmap, per-frame cost
is just a constant-alpha composite (CPU) / one textured quad (GL).
Cache invalidates only on view change (center/span/width) so it idles
while the QO-100 downlink display is static.
- Wired into both render paths: SpectrumView (CPU composite) and
SpectrumViewOpengl (texture, re-uploaded only when dirty).
- MainForm: SetView fed from SyncSpecViewFreq; visibility gated by
InQO100 (Pluto + full-duplex transponder), like RX MUTE / BEACON.
- DPI-robust: strip height scales with Screen.PixelsPerInch and the font
height is tied to the strip height (not point size), so labels always
fit at any Windows scaling.
- Segment/beacon frequencies and colors are a single editable table.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a per-operator toggle to hear your own downlink off the satellite
while transmitting (full-duplex self-monitor), and restrict QO-100-only
controls to the QO-100 mode.
- WDSPEngine: new MonitorRXDuringTX flag; audio gate becomes
`not FTXActive or (FKeepRXDuringTX and FMonitorRXDuringTX)` so RX audio
can pass to speakers during TX in full-duplex.
- Controller: FRxMuteOnTx (default True = mute RX on TX), SetRxMuteOnTx/
ApplyRxMuteToEngine, rfRxMuteOnTx notify; new InQO100 predicate
(Pluto + full-duplex XVTR slot) as the single gate for QO-100 UI.
- Settings: global RxMuteOnTx (rx_mute_on_tx, default True), persisted.
- MainForm: new RX MUTE button in TX panel next to DUP, visible only in
QO-100; BEACON button visibility tightened from "any transverter" to
InQO100 so it no longer shows in plain VHF/UHF modes.
- doc: plan updated (RF-AGC done, two temps, TX/RX locked split,
self-monitor, phase 6 done; remaining TODOs incl. web wiring).
Web intentionally left unchanged for now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pluto exposes two temperature sensors: the AD9361 transceiver
(ad9361-phy temp0/input, milli-°C) and the Zynq SoC/FPGA (xadc temp0,
raw+offset+scale → C = (raw+offset)*scale/1000). Only the former was
read. Now both are read and shown as "Temp 37/53C" (chip/SoC) in the
desktop status bar and web UI.
- ReadTelemetry gains an out SocTempC param (base + Pluto override);
Pluto reads xadc via the IIO context.
- Controller stores FLastPlutoSocTempC; SoC temp validated with a
plausibility window (no slew-limit — stable local sensor, unlike the
AD9361 sensor that spikes during mid-conversion).
- Status formatting handles one or both temps in MainForm and WebAdapter.
- Widen desktop status-bar field 3 (150→190) so both temps + RSSI fit;
web layout unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The PLL column (also used for QO-100 beacon status on Pluto) was
minmax(70px,90px), clipping "BCN LOCK 105Hz /7dB". Widen to
minmax(120px,185px), matching the desktop field-7 width. Frontend only.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the single tracked-beacon line with a filter band spanning the
beacon width, split into two halves (left/right Manchester lobes at
±400 Hz) with a central divider (carrier null) and band edges at
±450 Hz, matching the desktop dec-marker width. Reference frequency is
now a green dashed line. Frontend only (WebPageHtml).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror the desktop QO-100 beacon lock into the web interface and make it
work in the headless daemon.
Backend:
- WebServer: set_beacon/beacon_seed commands (+OnBeacon/OnBeaconSeed
events), beacon state fields, SetBeaconStatus, and beacon_visible/on/
text/ref_hz/track_hz in BuildStateJson. beacon_seed carries 'frac'
(0..1 click position); absolute Hz is computed controller-side from
live FCenterFreq/FSpanHz (mirrors desktop PixelToFreq).
- WebAdapter: OnBeacon->SetBeaconLock, OnBeaconSeed->BeaconSeedAtHz;
PushState mirrors compact status (matches MainForm.BeaconStatusText)
into the PLL status cell when visible (Pluto + active XVTR).
- MainForm/ewsdrd: wire the two callbacks.
- ewsdrd: call ServiceBeaconLock in the main loop @~10Hz (FRunning+
FWDSPReady gated). Without this the lock loop never ran headless.
Frontend (WebPageHtml):
- BCN button (visible only on Pluto+XVTR), highlighted while locked.
- Seed-on-mousedown with immediate return (like desktop FormMouseDown):
no drag/set_center so the gesture never moves the center / tears IQ.
Armed (first click after BCN) or Shift, mirroring desktop arm/Shift.
- PLL status cell shows beacon status (field-7 parity with desktop).
- Ref (green) + tracked (orange) beacon markers on spectrum/waterfall.
Known issue (unresolved): after lock the beacon can slowly drift off and
drop to "BCN sync". Suspected residual-sign anti-drift or retune-timing
on the web/daemon path; needs on-air diagnostics. See memory
project_web_beacon for the investigation state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless daemon never set the web server's FreqMhzDigits, so it
stayed at the constructor default (3 = up to 999 MHz) and VHF/UHF/SHF
frequencies didn't fit the web VFO display. The GUI mirrors this per-
device setting in ApplyFreqMhzDigits; the daemon now does the same on
connect (rfDevice) via PushFreqDigits, reading the value the controller
loaded into FLoadedGlobal.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fix: dragging/wheeling the spectrum in the web UI clamped frequency to a
hardcoded HF ceiling (vfoMax=60 MHz), so on Pluto VHF/UHF it snapped down
to 60 MHz and couldn't pan up (only the VFO wheel worked, via a different
limit). Push the backend's tuning range (BackendCaps.MinFreqHz/MaxFreqHz)
to the web alongside the band plan; JS vfoMin/vfoMax use freq_min/freq_max
from state. The transverter branch (XVTR_CUR>=0) is unchanged — it keeps
the wide-open range since the displayed RF freq is translated to IF and
clamped server-side.
Dead-code cleanup (audit of this session's work):
- SampleRateMode/TSampleRateMode: orphaned when the sample-rate
unification replaced the srmContinuous branch in ApplyBackendCapsToUI;
no readers left. Removed (+ now-unused PLUTO_MAX_SR).
- Pre-existing write-only/unused: TBackendCaps.MaxSampleRate,
SampleRateOverlay.SPAN_NAMES, MainForm.BAND_FREQ.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Web band selector was hardcoded to the HF plan, so on Pluto it showed
160m..6m instead of the VHF/UHF plan and highlighted the wrong entry
(band switching itself already worked: web sends idx, controller maps it
via the IsPluto plan). Mirror the sample-rate unification.
Single source of truth = BoardUtils -> controller:
- BoardUtils: TBandInfo/TBandPlanArray + BuildBandPlan(Pluto).
- TRadioController.BandPlan returns BuildBandPlan(IsPluto).
Both UIs derive from it:
- Desktop already plan-aware (RelabelBands + RestoreBand) - unchanged.
- Web: WebServer.SetBands + "bands" in state JSON; hosts push
BandPlan on connect/startup; JS builds the band selector from
state.bands (BAND_N/BAND_F now dynamic).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Sample-rate (span) presets were duplicated in three places and none was
authoritative: HPSDR set hardcoded in the desktop overlay (SPAN_RATES),
Pluto set in backend caps, and a separate hardcoded list in the web JS.
The web showed HPSDR rates even on Pluto, and the web adapter silently
dropped any rate outside a hardcoded HPSDR whitelist (so Pluto-only rates
like 960k/2304k never switched).
Single source of truth = backend caps -> controller:
- HPSDRNetwork.Caps now fills RatePresets [48k..1536k] (was nil).
- RadioBackend: named type TBackendRateArray.
- TRadioController.SampleRatePresets returns BackendCaps.RatePresets.
Both UIs derive from it:
- Desktop: ApplyBackendCapsToUI always feeds the overlay from
SampleRatePresets (overlay no longer owns the HPSDR list).
- Web: WebServer.SetRatePresets + rate_presets in state JSON; hosts
(daemon OnState/startup, GUI ApplyBackendCapsToUI/startup) push
SampleRatePresets; JS builds span buttons dynamically from it.
- WebAdapter.SyncSpan validates against SampleRatePresets instead of a
hardcoded whitelist, so any backend rate is accepted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The headless daemon (ewsdrd) only ever built HPSDR devices, so Pluto
could not be used: backend is chosen by Dev.Kind and Pluto opens by URI,
neither of which the daemon propagated. Also local audio played on the
host and web Discover never probed network Plutos.
Shared, backend-agnostic helpers in TRadioController (used by GUI + daemon):
- ResolveDevice(IP): discovered->saved lookup restoring Kind/URI/Serial/
BoardType/MAC. MainForm.ResolveDevice now delegates here.
- AddSavedDevice(name, addr): web dev_add saves Pluto when addr has a URI
scheme (ip:/usb:/local:), else HPSDR. Both web hosts use it.
- SeedPlutoProbeFromSaved: seed network-probe URIs from saved Plutos
(no mDNS -> a network Pluto is only found by direct URI probe).
- LocalAudioEnabled flag (GUI=True): when False the local sound card is
neither opened nor written; RX audio goes only to web (OnAudioConsume).
DeviceStore.AutoStartDevice(out Dev): full autostart record (Kind/URI/
Serial) so a saved Pluto (URI-addressed, empty IPAddress on USB) can
autostart.
Daemon (ewsdrd.lpr): LocalAudioEnabled:=False; SyncConnect via
ResolveDevice; autostart via AutoStartDevice; SyncDiscover seeds probe
URIs then Discover; SyncDevAdd via AddSavedDevice.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Expose the QO-100 slot's LOError (Hz) on the QO-100 settings page,
placed right after LNB LO. Maps to Entries[QO100_SLOT].LOError — the
live LNB-drift calibration that the beacon lock folds its correction
into. Group height extended to 8 rows and the info label shifted down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the display-FFT centroid beacon lock with a decoder-based loop that
trims the active transverter's LOError from the beacon decoder's precise NCO
carrier estimate, compensating LNB drift so the whole downlink (incl. FT8)
stays put. Single BEACON button (lock = decoder). Also unifies the beacon
decoder filter marker between the CPU and OpenGL spectrum renderers.
Verified on air: lock holds, FT8 decodes cleanly.
The narrow beacon decoder filter marker rendered differently in the two
spectrum views: CPU drew a translucent filled band (BlendBand) plus a centre
line, while OpenGL drew three plain vertical lines (both edges + centre), so
it looked like one band on CPU and "two parts" on GL.
Make the CPU path draw the same three lines as GL — consistent look and
cheaper (drops the per-frame per-pixel alpha blend for this marker; BlendBand
is kept for the RX/TX passband shading).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the display-FFT centroid beacon lock with a decoder-based loop.
The beacon decoder already tracks the carrier precisely via its NCO
(squaring-FFT acquisition + Costas offload); its residual ResidHz+CarFreqHz
is an exact measurement of the beacon's offset from the aim point. Feed that
into LOError of the active transverter so the LO retunes to compensate LNB
drift — the whole downlink stays put, calibration persists.
RadioController:
- Remove MeasureBeaconFFT and all display-FFT lock state/constants
(lobe/search/track/slew/sym/shape/seed-gain/prom), fields
FBeaconManualSeed/FBeaconPromDB/FBeaconDecOn, methods
SetBeaconDecode/SetBeaconDecodeAtHz/BeaconDecodeEnabled.
- SetBeaconLock is now the master switch (lock = decoder); BeaconSeedAtHz
aims the decoder; ServiceBeaconLock measures beacon freq from the decoder
scope and trims LOError (gain 0.5, deadband 20 Hz, step clamp 400 Hz,
settle 8 ticks). Feed-forward of the aim keeps the decoder locked through
the retune (net baseband ~0). Lock/SNR now come from the decoder.
MainForm: single BEACON button — left-click toggles lock (+ opens the
constellation/bulletin scope, arms the spectrum click for aiming),
right-click shows/hides the scope. Spectrum click (armed or Shift) aims via
BeaconSeedAtHz. Simplified status field and markers.
Both targets build (lazbuild --ws=qt6 + build-ewsdrd.sh). Not yet verified
on air. Risk: BEACON_RESID_SIGN=+1.0 — flip to -1.0 if the loop runs away.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
After successful on-air validation, drop the temporary diagnostics:
- IQ baseband dump to ~/ewsdr_beacon_iq.f32 (FDbgStream/DbgWrite2).
- BeaconLog file logger (~/ewsdr_beacon.log) and per-second STATE / AIM lines.
- Dead Gardner timing fields (FMidI/FMidQ/FHalf/FPrevI/FPrevQ), superseded by
the ML signal×slope TED.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Decode and show the AO-40 frame payload as text in the beacon scope window.
- RadioController.GetBeaconFrame exposes the latest 256-byte frame.
- BeaconScopeForm: poll the frame counter; on each new frame, parse the
payload (drop trailing 2-byte CRC, printable ASCII, 64-char lines, as in
gr-satellites qo100.parse) and append to a scrolling read-only memo.
- Window widened/heightened; constellation size capped to leave room.
Frame format verified offline against a real on-air capture: the decoder
produces the live QO-100 AMSAT bulletin text (RS errors=0).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Full chain now decodes the QO-100 central beacon to 256-byte AO-40 frames
on-air (frames>0, RS errors=0). Builds on M1 (stable BPSK demod).
FEC backend (BeaconFEC.pas, TBeaconFEC):
- AO-40 FEC: distributed sync (65 bit, step 80) -> 80x65 deinterleave ->
Viterbi r=1/2 k=7 -> CCSDS descramble -> 2x RS(160,128). Links system
libfec (Karn) load-time (libfec.so/.dll/.dylib). Viterbi AO-40 [0x4F,-0x6D]
remapped to libfec [0x6D,0x4F]. Validated against gr-satellites reference
vectors (fectest2: exact 256-byte frame, 0 mismatches).
DBPSK Manchester frontend (BeaconDecoder.pas):
- Chip-rate (800) processing: RRC matched filter -> ML signal-times-slope
timing recovery -> Costas -> Manchester combine (block phase select) ->
differential decode -> soft symbols to FEC.
- Carrier acquisition: squaring-FFT estimates the residual (carrier at +-pi/chip
defeats decision-directed Costas), one-shot pulls it to DC via residual NCO.
- Costas frequency offload into pre-RRC NCO (with deadband) tracks LNB drift
without hitting the +-pi Costas clamp.
- ML TED replaces Gardner, which degenerates on the Manchester chip stream.
Temporary on-air diagnostics retained (IQ dump + STATE log) pending wider
signal validation; to be removed before final cleanup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ew8bakandClaude Opus 4.8