Add a thin colored strip along the bottom of the spectrum (above the
ruler) showing the QO-100 narrow-band transponder bandplan: mode
segments (CW ONLY / NB DIGI / DIGI / SSB / MIXED MODES) plus the three
beacons (CW / PSK / EXP) as muted-red cells at their ranges.
- New unit BandPlanOverlay.pas (TBandPlanOverlay), modelled on
VfoOverlay: content rendered once into a cache bitmap, per-frame cost
is just a constant-alpha composite (CPU) / one textured quad (GL).
Cache invalidates only on view change (center/span/width) so it idles
while the QO-100 downlink display is static.
- Wired into both render paths: SpectrumView (CPU composite) and
SpectrumViewOpengl (texture, re-uploaded only when dirty).
- MainForm: SetView fed from SyncSpecViewFreq; visibility gated by
InQO100 (Pluto + full-duplex transponder), like RX MUTE / BEACON.
- DPI-robust: strip height scales with Screen.PixelsPerInch and the font
height is tied to the strip height (not point size), so labels always
fit at any Windows scaling.
- Segment/beacon frequencies and colors are a single editable table.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Builds on the beacon-lock baseline: keeps the proven display-FFT control
path (hardware-LO trim folded into the active transverter LOError), and
hardens it. The narrowband NCO/FLL scaffold (BeaconLock.pas) is removed —
it was never in the control path.
- RadioController:
* Persist live: each correction folds straight into the active xvtr
LOError (visible in Settings, survives restart as LNB calibration);
disk writes throttled. FBeaconLockHz is now only a session indicator.
* Robust tracking vs nearby signals: narrow ±2 kHz gate while locked
(±6 kHz only for acquisition), slew-rate outlier rejection (a sudden
centroid jump = interferer, not slow LNB drift → ignored), and lobe
shape validation in MeasureBeaconFFT (width + power symmetry) so a CW
carrier / one-sided neighbour isn't mistaken for the BPSK beacon.
Prominence measured over the in-window noise floor (gate-width robust).
* Fast convergence: feed-forward (predict post-retune position so the
window follows the beacon through the jump) + near-deadbeat correction
on the manual click → one click locks instead of repeated tapping.
* Single central BPSK beacon (10489.750); dead CoarseBeaconOffset and
unused throttle counters removed; stale NCO/FLL/4 Hz comments fixed.
- WDSPEngine: drop the per-sample TBeaconTracker RX-IQ tap (tracker gone).
- MainForm: BEACON is now a plain button, shown only on Pluto in a
transverter. Lock status (off / click / search / LOCK + correction +
prominence) moves to status-bar field 7 in place of PLL on Pluto;
openHPSDR keeps PLL there.
- SettingsForm/StatusBar: widen LO Error field to ±10 MHz (QO-100 LNBs
drift hundreds of kHz) and widen status field 7 for the beacon text.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Click the beacon on the spectrum; the controller tracks it and continuously
trims the transverter LO so the whole downlink stays put as the LNB drifts.
- BeaconLock.pas: TBeaconTracker scaffold (narrowband NCO/FLL) — kept but no
longer in the control path (FLL diverged on the suppressed-carrier BPSK
beacon + Pluto DC offset). Measurement now uses the proven display-FFT path.
- RadioController: FBeaconLockHz folded into XvtrTranslate (on top of LOError).
MeasureBeaconFFT finds the beacon by POWER-WEIGHTED CENTROID of the lobe
(BPSK has a suppressed carrier → broad symmetric ~2.4 kHz lobe, not a line;
a peak-finder jitters, the centroid sits on the carrier). Track position in
ABSOLUTE display Hz (FBeaconTrackHz) so scrolling the waterfall/centre never
moves the search window off the beacon. Closed loop: e = tracked - ref,
d(e)/d(LockHz) = -1 -> LockHz += gain*e; settle cooldown after each correction
(display-FFT lags the LO retune -> avoids overshoot); deadband 75 Hz +
centroid/prominence smoothing + lock hysteresis for a steady lock.
Correction applied only after the user clicks (manual seed), so a crowded
band can't pull a neighbour to the reference.
- WDSPEngine: SetBeaconTracker + RX-IQ tap (tracker idle now, ~1 check/sample).
- SpectrumView + GL: beacon markers — green = reference (10489.750), orange =
tracked centroid.
- MainForm: BEACON button (RX block, XVTR-only). Flow: BEACON -> "CLICK BCN"
-> click beacon -> "L<corr> /<prom>". ServiceBeaconLock driven by MeterTimer.
Reference defaults to the middle BPSK beacon 10489.750. Tested on-air against
Es'hail-2: locks and holds, survives waterfall drag.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On macOS Cocoa, TBitmap.pf32bit stores pixels in ARGB order
(byte0=A, byte1=R, byte2=G, byte3=B) rather than BGRA used on
Linux/Windows. All raw ScanLine pixel blending and channel mapping
is now guarded with { DARWIN} to use the correct offsets.
Also fix PortAudio library discovery on macOS: probe .dylib names
(including Homebrew paths) before falling through to .so/.dll.
ew8bakandClaude Opus 4.8