unit CATSerial;
{
  CATSerial.pas — CAT через последовательные порты (до 4 штук).

  Каждый порт запускает отдельный поток-слушатель, который:
   1. Читает байты из COM/ttyS порта
   2. Накапливает их в буфер до символа ';'
   3. Передаёт команду в TCATEngine.Parse()
   4. Отправляет ответ обратно в порт

  Платформы:
   • Linux : /dev/ttyS0..3, /dev/ttyUSB0, etc.
   • Windows: COM1..COM4 (имя порта вводится вручную)

  Зависимости: CATEngine, Serial (FPC fcl-serial RTL unit)
}
{$IFDEF FPC}
  {$MODE Delphi}
{$ENDIF}

interface

uses
  Classes, SysUtils,
  Serial,   // FPC cross-platform serial unit
  {$IFDEF MSWINDOWS}Windows,{$ENDIF}
  SyncObjs,
  CATEngine;

const
  CAT_SERIAL_MAX_PORTS = 4;
  CAT_SERIAL_BUF_SIZE  = 256;

type
  TCATSerialParity = (cspNone, cspOdd, cspEven);

  TCATSerialConfig = record
    Enabled:   Boolean;
    PortName:  string;   // e.g. '/dev/ttyS0' or 'COM1'
    BaudRate:  Integer;  // 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
    DataBits:  Integer;  // 7 or 8
    StopBits:  Integer;  // 1 or 2
    Parity:    TCATSerialParity;
  end;

  TCATSerialPort = class;

  { TCATSerialThread — per-port listener thread }
  TCATSerialThread = class(TThread)
  private
    FOwner:  TCATSerialPort;
    FHandle: TSerialHandle;
    FBuf:    string;
    procedure ProcessBuffer;
    function  TryOpenPort: Boolean;
  protected
    procedure Execute; override;
  public
    constructor Create(AOwner: TCATSerialPort);
  end;

  { TCATSerialPort — one serial CAT port }
  TCATSerialPort = class
  private
    FConfig:  TCATSerialConfig;
    FEngine:  TCATEngine;
    FThread:  TCATSerialThread;
    FHandle:  TSerialHandle;
    FLock:    TCriticalSection;
    FActive:  Boolean;
  public
    constructor Create(AEngine: TCATEngine; const ACfg: TCATSerialConfig);
    destructor  Destroy; override;
    procedure Start;
    procedure Stop;
    procedure SendStr(const S: string);
    property  Handle:  TSerialHandle    read FHandle  write FHandle;
    property  Config:  TCATSerialConfig read FConfig;
    property  Engine:  TCATEngine       read FEngine;
    property  Active:  Boolean          read FActive;
  end;

  { TCATSerialManager — manages up to 4 serial ports }
  TCATSerialManager = class
  private
    FPorts:  array[0..CAT_SERIAL_MAX_PORTS-1] of TCATSerialPort;
    FEngine: TCATEngine;
  public
    constructor Create(AEngine: TCATEngine);
    destructor  Destroy; override;
    procedure ApplyConfig(const Configs: array of TCATSerialConfig);
    procedure StopAll;
    function  ActiveCount: Integer;
  end;

implementation

{ ── TCATSerialThread ──────────────────────────────────────────────────────── }

constructor TCATSerialThread.Create(AOwner: TCATSerialPort);
begin
  FOwner := AOwner;
  FBuf   := '';
  FreeOnTerminate := False;
  inherited Create(True);
end;

function TCATSerialThread.TryOpenPort: Boolean;
var
  cfg: TCATSerialConfig;
  h:   TSerialHandle;
  par: TParityType;
begin
  Result := False;
  cfg := FOwner.Config;
  h := SerOpen(cfg.PortName);
  {$IFDEF MSWINDOWS}
  if h = TSerialHandle(INVALID_HANDLE_VALUE) then Exit;
  {$ELSE}
  if h < 0 then Exit;
  {$ENDIF}

  case cfg.Parity of
    cspNone: par := Serial.NoneParity;
    cspOdd:  par := Serial.OddParity;
    cspEven: par := Serial.EvenParity;
  else       par := Serial.NoneParity;
  end;

  SerSetParams(h, cfg.BaudRate, cfg.DataBits, par, cfg.StopBits, []);
  FHandle := h;
  FOwner.Handle := h;
  Result := True;
end;

procedure TCATSerialThread.ProcessBuffer;
var
  tpos: Integer;
  cmd, resp: string;
begin
  repeat
    tpos := Pos(';', FBuf);
    if tpos = 0 then Break;
    cmd  := Copy(FBuf, 1, tpos);
    Delete(FBuf, 1, tpos);
    resp := FOwner.Engine.Parse(cmd);
    if resp <> '' then
      FOwner.SendStr(resp);
  until tpos = 0;
  // Guard against runaway buffers (no terminator seen in 256+ chars)
  if Length(FBuf) > CAT_SERIAL_BUF_SIZE then FBuf := '';
end;

procedure TCATSerialThread.Execute;
var
  ch: Byte;
  n:  LongInt;
begin
  if not TryOpenPort then Exit;
  try
    while not Terminated do begin
      n := SerReadTimeout(FHandle, ch, 50);
      if n = 1 then begin
        FBuf := FBuf + Chr(ch);
        if ch = Ord(';') then ProcessBuffer;
      end;
    end;
  finally
    SerClose(FHandle);
    {$IFDEF MSWINDOWS}
    FOwner.Handle := INVALID_HANDLE_VALUE;
    {$ELSE}
    FOwner.Handle := -1;
    {$ENDIF}
  end;
end;

{ ── TCATSerialPort ────────────────────────────────────────────────────────── }

constructor TCATSerialPort.Create(AEngine: TCATEngine; const ACfg: TCATSerialConfig);
begin
  inherited Create;
  FEngine := AEngine;
  FConfig := ACfg;
  {$IFDEF MSWINDOWS}
  FHandle := INVALID_HANDLE_VALUE;
  {$ELSE}
  FHandle := -1;
  {$ENDIF}
  FLock   := TCriticalSection.Create;
  FActive := False;
end;

destructor TCATSerialPort.Destroy;
begin
  Stop;
  FLock.Free;
  inherited;
end;

procedure TCATSerialPort.Start;
begin
  if FActive or not FConfig.Enabled then Exit;
  FActive := True;
  FThread := TCATSerialThread.Create(Self);
  FThread.Start;
end;

procedure TCATSerialPort.Stop;
begin
  if not FActive then Exit;
  FActive := False;
  if Assigned(FThread) then begin
    FThread.Terminate;
    FThread.WaitFor;
    FreeAndNil(FThread);
  end;
end;

procedure TCATSerialPort.SendStr(const S: string);
var buf: AnsiString;
begin
  {$IFDEF MSWINDOWS}
  if FHandle = INVALID_HANDLE_VALUE then Exit;
  {$ELSE}
  if FHandle < 0 then Exit;
  {$ENDIF}
  FLock.Acquire;
  try
    buf := AnsiString(S);
    if Length(buf) > 0 then
      SerWrite(FHandle, buf[1], Length(buf));
  except
    // ignore write errors (port may have been closed)
  end;
  FLock.Release;
end;

{ ── TCATSerialManager ─────────────────────────────────────────────────────── }

constructor TCATSerialManager.Create(AEngine: TCATEngine);
var i: Integer;
begin
  inherited Create;
  FEngine := AEngine;
  for i := 0 to CAT_SERIAL_MAX_PORTS-1 do
    FPorts[i] := nil;
end;

destructor TCATSerialManager.Destroy;
begin
  StopAll;
  inherited;
end;

procedure TCATSerialManager.ApplyConfig(const Configs: array of TCATSerialConfig);
var
  i:   Integer;
  cnt: Integer;
begin
  StopAll;
  cnt := Length(Configs);
  if cnt > CAT_SERIAL_MAX_PORTS then cnt := CAT_SERIAL_MAX_PORTS;
  for i := 0 to cnt-1 do begin
    FPorts[i] := TCATSerialPort.Create(FEngine, Configs[i]);
    if Configs[i].Enabled then FPorts[i].Start;
  end;
end;

procedure TCATSerialManager.StopAll;
var i: Integer;
begin
  for i := 0 to CAT_SERIAL_MAX_PORTS-1 do begin
    if Assigned(FPorts[i]) then begin
      FPorts[i].Stop;
      FreeAndNil(FPorts[i]);
    end;
  end;
end;

function TCATSerialManager.ActiveCount: Integer;
var i: Integer;
begin
  Result := 0;
  for i := 0 to CAT_SERIAL_MAX_PORTS-1 do
    if Assigned(FPorts[i]) and FPorts[i].Active then Inc(Result);
end;

end.