- FILT_* таблицы (BW/DEF/DEV/COUNT) перенесены MainForm -> Settings.pas
(нужны контроллеру для headless-выбора фильтра); UI-подписи FILT_*_NAMES
остались в MainForm (ссылки разрешаются через uses Settings).
- ApplyModeFilter (чистый DSP) перенесён в TRadioController; все вызовы в
MainForm -> FController.ApplyModeFilter.
- Контроллер: ApplyModeDefaults (дефолтный фильтр/девиация под FMode,
зеркало state-части UpdateFilterButtons) + наполнены команды SetMode
(FMode + дефолт + DSP SetMode/TUN + ApplyModeFilter + band cache) и
SetFilterIdx (FFilterBW по таблицам режима + ApplyModeFilter + band cache).
- BtnModeClick/BtnFilterClick — тонкие обёртки к командам; рендер
(StyleButton + UpdateFilterButtons + SyncSpecViewFreq) в
OnControllerState(rfMode/rfFilter).
OnModeFilterSelect (VFO overlay), SyncWebMode/SyncWebFilter (web/CAT),
RestoreBand пока зовут FController.ApplyModeFilter инлайн — мигрируют
в следующих батчах (как и в прошлых: web/overlay позже).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ApplyVfoA (общий путь click-to-tune/wheel/VFO/band) синхронно дёргал
PbSpectrum.Invalidate, но не PbRuler.Invalidate — линейку обновлял лишь
таймер через NeedsRulerRedraw-гейт, отсюда "не всегда" при CTUN off.
Invalidate только планирует перерисовку (не тяжёлый рендер), а DrawRuler
дешёвый, поэтому дёргаем PbRuler.Invalidate сразу рядом с PbSpectrum.
Явная инвалидация Ruler из RestoreBand убрана как избыточная — band
идёт через ApplyVfoA, теперь единый источник правды там.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ruler (PbRuler) — отдельный paintbox, перерисовывается только по
PbRuler.Invalidate. Дискретные события его не дёргали:
- CTun toggle (batch 7): OnControllerState(rfCTun) рисовал спектр/водопад,
но не линейку. Добавлен InvalidateRulerCache + PbRuler.Invalidate.
- Смена диапазона: RestoreBand -> ApplyVfoA, а ApplyVfoA намеренно
откладывает рендер на таймер (FSpectrumDirty) ради wheel/drag — что
для оффлайна/без RUN не перерисовывало линейку. Добавлена синхронная
инвалидация Ruler в конце RestoreBand (дискретное событие, флуда нет).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Первая команда тяжёлого класса. TRadioController.SetCTun несёт логику
движка/сети (band cache, при выключении — центрирование на VFO + SetShift(0)
+ UpdateState/SendFullHP); все нужные поля и хелперы XvtrTranslate/
ActiveTXFreqHz уже в контроллере. BtnCTunClick — тонкая обёртка
(SetCTun(not FCTun)); рендер (StyleButton/SyncSpecViewFreq/перерисовка
спектра+водопада) ушёл в OnControllerState(rfCTun).
Прямые записи FController.FCTun в путях band restore / ActivateVfo
оставлены — мигрируют со своими командами (Band/VFO).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Перенос частотных хелперов (общий блокер для Vfo/Mode/Band/CTun/TX/FM-Rpt)
в TRadioController как чистых read-only функций над состоянием. Все
константы (CFG_XVTR_COUNT, MODE_FM, RPT_MINUS/PLUS) уже доступны через
Settings/WDSPEngine/FMRepeater в uses контроллера. MainForm.XvtrTranslate
и MainForm.ActiveTXFreqHz стали тонкими обёртками-делегатами — ~40 мест
вызова в UI/сетевом слое работают без изменений.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The user plans to expose FM over web/CAT later, so FM controls get the
same controller treatment now — future web/CAT FM commands plug straight
into these.
- Relocate CTCSS_COUNT/CTCSS_TONES from MainForm to FMRepeater (a shared
FM unit MainForm already uses) so TRadioController can drive CTCSS on the
DSP. CTCSS_NAMES stays in MainForm (UI dropdown labels). MODE_FM is
already visible to the controller via WDSPEngine.
- SetFMSquelch/SetFMSquelchLevel apply FM squelch (mode-gated) to the DSP;
SetFMCTCSS/SetFMCTCSSTone clamp and apply CTCSS. All fire OnStateChanged.
- OnControllerState restyles the SQ/CTCSS buttons, syncs the squelch slider
+ label, and the CTCSS tone dropdown. Handlers/SetFMCTCSSTone call the
commands (manual CTCSS still clears the auto-active flag in the handler).
FM repeater stays for the heavy batch — it needs XvtrTranslate/
ActiveTXFreqHz moved into the controller. ApplyFMSquelch remains for
band/mode re-apply paths (RestoreBand, XVTR).
Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
FM step is the only FM control exposed to another frontend (web:
SyncWebFMStep in, FWebServer.FMStepIdx out), so it's the FM param with
real cross-frontend value.
- TRadioController.SetFMStep clamps and fires OnStateChanged(rfFMStepIdx).
- OnControllerState updates the step dropdown, pushes FMStepIdx to the web
server, and sets the FSpecView FM grid step (when in FM mode).
- MainForm.SetFMStep is now a thin wrapper over the command, so existing
callers (band restore, dropdown select, web sync, XVTR restore) are
unchanged.
FM squelch/CTCSS/repeater are intentionally left as-is: they are UI-only
(no web/CAT/daemon exposure) and already operate on controller state
fields, so routing them through commands adds ceremony without value for
the swappable-UI/daemon goals; CTCSS would also need CTCSS_TONES relocated
to a shared unit and repeater needs the network helpers (XvtrTranslate/
ActiveTXFreqHz) that belong to the heavy-command batch.
Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SetAtten clamps, applies to the network (SetStepAtten), and fires
OnStateChanged; SyncWebAttn calls it. No desktop widget exists for the
attenuator, so there's no OnControllerState case — but state and the web
snapshot now flow through the single command path like everything else.
Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
First sliders through the controller, exercising the FSyncingFromController
re-entrancy guard:
- SetVolume/SetAGCTop clamp, apply to the DSP engine, update band cache,
and fire OnStateChanged. SetAGCTop reuses ApplyAGCToEngine (the unified
AGC index->enum mapping), fixing the same bad TWDSPAGCMode(index) cast
that TrkAGCChange/SyncWebAGCTop used when re-applying AGC on level change.
- OnControllerState updates the slider/label/spectrum (rfAGCTop also
refreshes the FSpecView AGC line, now consistent for web-initiated
changes too) and the FSpecView waterfall flags (rfWfAGC/rfWfNF).
- TrkVolumeChange/TrkAGCChange (guarded), SyncWebVolume/AGCTop/WfAGC/WfNF,
and ApplyWfAGCNF all call the commands.
Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TRadioController.SetAGCMode now owns the index->WDSP mapping, applies to
the DSP engine, and updates the band cache, then fires OnStateChanged.
OnControllerState restyles the AGC button group. BtnAGCModeClick,
OnVfoOverlayAGCChange, and SyncWebAGC all call the command.
Fixes a latent web bug: SyncWebAGC used TWDSPAGCMode(index) directly,
mapping the UI index (0=FAST..4=OFF) onto the wrong enum (0=OFF...), so
web AGC selections set the wrong DSP mode. The button/overlay path used
the correct AGCModes[] array; unifying on the command applies that to web
too. Buttons/overlay behavior unchanged.
Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Apply the slice pattern to the noise-filter controls:
- TRadioController.SetNR/SetNB/SetSNB/SetANF now clamp and apply to the DSP
engine, then fire OnStateChanged.
- OnControllerState refreshes the matching button (UpdateNR/NB/SNB/ANF).
- Click handlers, SyncWebNR/NB/SNB/ANF, and OnVfoOverlayDSPChange all call
the commands instead of poking fields/widgets and the DSP directly.
UI clicks, the web client, and the VFO overlay now share one path; the
web client already renders these fields in applyState, so UI->web syncs.
Builds clean (cocoa); behavior unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Vertical slice to establish the Phase 3 pattern before replicating it
across all commands: logic moves into controller commands, the UI becomes
event-driven, and frontends call commands instead of poking widgets.
- TRadioController.SetMute now carries the real logic (state + FDSPEngine.
SetMute), then fires OnStateChanged(rfMute).
- MainForm subscribes via OnControllerState (controller -> UI). It restyles
BtnMute from controller state. FSyncingFromController guards against
re-entrancy when a programmatic widget change would retrigger OnChange.
- BtnMuteClick -> FController.ToggleMute; SyncWebMute -> FController.SetMute.
The button/web no longer own the mute logic or the restyle.
Proves the command/event/refresh loop end-to-end (UI click and web both
route through the controller). Remaining commands follow this pattern.
Builds clean (cocoa); behavior unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
NR/NB modes, SNB/ANF flags, and drive % were stored only in the widgets
themselves (Btn*.Tag, TrkDrive.Position) — the last hard blocker to a
headless/daemon mode, since without those controls the state had nowhere
to live and CAT/Web read them directly.
- NR/NB: BtnNR.Tag/BtnNB.Tag -> FController.FNRMode/FNBMode (Integer).
- SNB/ANF: BtnSNB.Tag/BtnANF.Tag (0/1) -> FController.FSNB/FANF (Boolean).
- Drive %: TrkDrive.Position -> new FController.FDrivePercent; the slider
is now pure input (TrkDriveChange pushes its value into the controller),
while FDriveLevel stays the derived hardware byte.
Buttons/sliders become pure view+input: click handlers and UpdateXButton
read/write the controller field; CAT getters, the web snapshot, and
GetSnapshot all source state from the controller, not the widgets.
No behavioral change. Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Decouple MainForm from CAT/Web by introducing a headless core,
TRadioController, as the single home for radio state and engine objects.
This is groundwork for swappable UIs, a daemon (Web-only) mode, and a
future hardware control panel — each becomes a frontend/adapter over the
same controller API.
RadioController.pas (new):
- Radio state + engine objects (Network/DSP/Audio/Settings/Channels) as
public fields named exactly as in MainForm, so wiring is mechanical.
- Command API: absolute Set* plus relative *By/Up/Down (for encoders).
- OnStateChanged(field) notifications and GetSnapshot for frontend sync.
- Invoke/OnInvoke (TUIInvokeEvent) thread-marshalling seam (GUI uses
TThread.Synchronize; daemon supplies its own).
- Commands are scaffolding for now (update field + fire event); engine
logic stays in MainForm and migrates in later phases (TODO-wiring).
MainForm.pas:
- Owns FController; creates it first in FormCreate, frees it last in
FormDestroy. Engines are still created/freed by MainForm into the
controller's fields (ownership move is a later phase).
- ~1400 FXxx references redirected to FController.FXxx (implementation
only); dead field declarations removed from the interface.
No behavioral change — pure state relocation. Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a "Send audio stream to radio (built-in speaker)" checkbox on the
Settings → Audio tab. It is a single switch for the radio's built-in
speaker:
- ON — RX audio is streamed to the radio via the DDC Audio packet
(port 1028, 64 L/R pairs per packet) and the speaker is unmuted
(High Priority byte 1400 bit1 = 0).
- OFF — speaker is muted (byte 1400 bit1 = 1, ANAN-8000DLE IO1 output)
and no audio stream is sent.
The float->int16 conversion and 64-pair packet accumulation live in
THPSDRNetwork (SendSpeakerAudio/SetSpeakerAudio), next to SendDDCAudio;
MainForm only reads the setting and forwards the audio. State is
persisted per-MAC (send_audio_to_radio, default off) and re-applied on
each radio start.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Wires the new wdsp WFM API into the engine and adds a WFM preset to the
FM filter row (200 kHz BW / 75 kHz deviation). Also fixes WDSP_SAM
constant which was 12 — that slot is now RXA_WFM in the updated enum.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Mirror the existing Wideband gradient fill option for the main spectrum:
a "Spectrum gradient fill" checkbox on the Display settings tab gates the
under-curve gradient in TSpectrumView.DrawSpectrum. The curve, grid,
filter band and VFO markers always draw; only the gradient is optional.
Persisted as spectrum_fill in settings JSON (default True, preserving
current appearance). Wired through Settings -> SettingsForm visibility
event -> MainForm -> TSpectrumView.FillSpectrum, same path as
WidebandFill.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ApplyChannel now sets TrkDrive from Ch.Power; saves pre-channel level in
FPreChannelPower (works around TrkDriveChange clearing the field on assignment)
- Power is restored when tuning away from channel (CheckChannelActive) or on
first VFO movement after returning to band with no active channel (ApplyVfoA)
- Manual drive slider move clears FPreChannelPower so restore is skipped
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New ChannelStore.pas: TChannel record + JSON persistence (channels.json)
- New ChannelsForm.pas: full channel editor (list + fields, pre-fills from current radio state)
- CH button in RX block: left-click opens dropdown, right-click opens editor
- Active channel: button highlights with channel name, deactivates on VFO move
- ApplyChannel: auto-switches XVTR/HF band based on channel frequency; saves old
band state before switching to prevent cache corruption
- SaveCurrentBand: skip save when VFO > 61 MHz (prevents HF cache corruption
from VHF channel application without XVTR)
- DeactivateXvtr: save full XVTR state (was only saving LastFreq)
- CTCSS/RPT from channel marked as auto: cleared automatically when tuning away
from channel frequency; survives band switches via FXvtrSettings auto-flags
- TXvtrEntry: add LastCTCSSAutoActive, LastFMRptAutoActive fields
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add PanelRXBlock between TX and Band with CTUN, VOL, NR/NB/SNB/ANF/MUTE
- Move AGC panel to sit directly below RX block for logical RX grouping
- Move DUP button into TX panel below MOX/TUN
- Rename PanelRX → PanelAGC to match its content
- Standardize block label top (2px) and first-control top (16px) across all
panels: AGC, SQL, CTCSS, STEP were inconsistent
- Fix left panel width restore after hide: save actual DPI-scaled width before
zeroing instead of hardcoding 232, preventing panel truncation on Win32 with
display scaling enabled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
(ClickFreq div StepHz)*StepHz always snapped downward; replaced with
((ClickFreq + StepHz/2) div StepHz)*StepHz so clicks above the midpoint
between two steps correctly snap to the higher one.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces TProgressBar in TWisdomProgressDialog with TFlatProgressBar,
drawn entirely via Canvas (plain rectangle, no native widget styling).
Dialog now receives the active TAppTheme so both dark and light themes
are applied consistently to background, label, and progress bar.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- LFM: Position = poDesigned (was poScreenCenter, overriding our restore)
- RestoreWindowBounds: remove position scaling (L,T invariant across DPI);
scale size correctly per backend: LCLWin32 uses CurDPI/SavedDPI (physical px),
Qt6/GTK/Cocoa use SavedDPI/CurDPI (logical px, inverse); fix min-size
inflation on Qt6 (was MulDiv(900,DPI,96) which exceeds logical screen width
at 150%+ scale, forcing window to 0,0)
- SaveWindowBounds moved from FormDestroy to FormClose while window is still
stable; add guard for bogus RestoredLeft/Top values on Qt6 when maximized
- RestoreWindowBounds stores FRestoreL/T and re-applies position in AfterShowTick
(200ms after show) when WM frame extents are already known to Qt, fixing the
systematic right/down drift caused by unknown frame extents at FormCreate time
- Save and restore WindowState (maximized flag); skip AfterShowTick position
re-apply when window is maximized
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove ResizeSMeter (Pango font measurement + multiple SetBounds) from 60 Hz timer tick;
it is still called on actual resize events
- Throttle UpdateAGCLines WDSP API calls from 60 Hz to ~10 Hz (every 6 ticks)
- Optimize spectrum alpha-fix loop: write-only byte access instead of read-modify-write DWORD
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SpectrumView: rewrite DrawSpectrumGradient to blend directly into
FSpectrumBitmap via ScanLine instead of TLazIntfImage+BitBlt (stale DC
on win32). Add alpha=$FF fixup pass so pf32bit Canvas.Draw renders via
StretchBlt not AlphaBlend. Remove FSpecGradImg/FSpecGradBmp fields.
MainForm: mask exZeroDivide/exInvalidOp in FormCreate so WDSP DLL
divide-by-zero does not crash the DSP thread on win32 (Qt6 already
masks FPU exceptions globally).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add SampleRateOverlay.pas: TCustomControl overlay (top-left of spectrum)
with hide-panel button and 6 span buttons (48k–1536k), same hit-test
pattern as VfoOverlay
- Consolidate toolbar: move PanelTopVfoGroup and PanelSMeterRight into
PanelToolbar (height 72) instead of floating on the form
- Remove PanelSpanButtons (alTop spacer) that caused the ~1cm black strip
at the top of the spectrum
- Add separator line inside PanelToolbar anchored to its bottom edge,
with 16px left/right margins
- Fix left panel blocks starting Y offset (was 38, now 0)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
AGC button in DSP row shows current mode (FAST/MED/SLOW/LONG/OFF).
Click toggles a picker row below; selecting a mode closes it, fires
OnAGCChange, and syncs MainForm BtnAGCMode buttons and DSP engine.
Overlay height expands 136→159 px while picker is open.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Moves CTCSS tone picker and FM step picker from inline TPanel+TFlatButton
arrays into a standalone FlatDropDown.pas module. TFlatDropDown owns the
popup panel, handles positioning and item selection, and fires OnSelect.
ApplyStyle syncs button colors on theme change.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Third button row mirrors MainForm NR (cycle 0-4), NB (cycle 0-2),
SNB and ANF toggles. OnDSPChange event syncs state back to MainForm
buttons and DSP engine. Overlay height tightened to match top/bottom
padding.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- FM filter row now shows only NFM (11 kHz) and FM (16 kHz) matching MainForm
- OnModeFilterSelect updates FFMDeviation and FFilter index for FM mode
- Mode and filter button widths distributed evenly (proportional, not fixed BtnW)
- S-meter inset by extra 4 px on each side
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ew8bak