- Remove manual "Mic Source" (Radio/SoundCard) setting from UI and storage;
source is now determined automatically in ApplyMOX: HW PTT → txmsRadio,
MOX button/CAT → txmsSoundCard if audio device configured, else txmsRadio
- Replace "Line in" checkbox with "Mic jack" combo (Mic In / Line In);
when Line In is selected, Mic Boost is hidden and Line In Gain (-34.5..+12 dB,
step 1.5 dB) is shown and sent as DUC Specific byte 51
- Add Tip/Ring connector selector (Orion/OrionMkII boards 4/5 only, byte 50 bit 3);
control is hidden for other board types
- Fix byte 50 bit 1 (Mic Boost) suppressed when Line In is active
- Fix byte 51 comment polarity (was reversed: 0=+12dB; correct: 0=-34.5dB)
- New JSON fields: mic_line_in, mic_tip_ring, line_in_gain_db; mic_source removed
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UserADC1 (bytes 55-56) carries current sensor data on the ANAN-8000DLE.
Formula from Thetis: amps = ((adc/4095 * 5000) - 360) / 120 (Voff=360mV,
Sens=120mV/A). Status bar now shows "Supply: 13.8V / 2.3A | PLL OK"
when current is available.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Protocol Appendix A documents only the ADC reference voltage constant;
the PCB voltage divider must also be applied (from Thetis source):
- Boards 1-3 (Hermes/Angelia): ×(4.7+0.82)/0.82 ≈ 6.73, Vref=3.3V
- Board 5 (Orion MkII): ×(22+1)/1.1 ≈ 20.9, Vref=5.0V
For board type 5, supply voltage is measured via UserADC0 (bytes 57-58),
not the supply_volts field (bytes 49-50), matching Thetis behaviour.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Per Appendix A of openHPSDR Ethernet Protocol v4.3:
- Boards 1,2,3 (Hermes/Angelia): V = ADC/4095 * 3.3 (was always using this)
- Boards 4,5 (Orion/Orion MkII): V = ADC/4095 * 5.0 (was wrong, showing ~66% of real value)
- Board 0 (Atlas) has no supply voltage measurement per protocol spec
("not Atlas bus systems")
- Boards 6 (Hermes Lite), 10 (Saturn): constant not documented, hide Supply field
ADCToSupplyVolts now takes BoardType and returns -1.0 for unsupported boards.
DoUpdateStatus omits the Supply field when -1.0 is returned.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ew8bakandClaude Fable 5