- Add LastCTun, LastAGCMode, LastAGCTop to TXvtrEntry; SaveCurrentBand
now captures all three in the XVTR branch; ActivateXvtrBand restores
them on slot switch/startup (previously CTun was always reset to False
and AGC was never saved/restored for XVTR)
- WebServer: expose fmstep_idx in state JSON so web clients sync the
FM step from desktop state
- WebPageHtml: swap stepSel options to FM steps (6.25k/12.5k/20k/25k)
when mode=FM, restore HF steps when leaving FM; syncs fmstep_idx
from server on connect and mode change
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
FM modulation:
- Replace 10 generic FM filter buttons with NFM (2.5kHz dev/11kHz BW) and FM
(5.0kHz dev/16kHz BW); deviation applied to both RX and TX via WDSP
- Add FM squelch panel (SQL toggle + slider 0..100, per-band save/restore)
with WDSP SetRXAFMSQRun/SetRXAFMSQThreshold (threshold = level/200.0)
- Add CTCSS panel with on/off toggle and custom flat-button tone picker popup
(38 standard tones 67.0..250.3 Hz, default 67.0); tone selection and enable
state saved per band via SetTXACTCSS*
- FM panels (SQL, CTCSS) shown only in FM mode, layout via RelayoutBelowBands
- PanelFilter height shrinks in FM mode so panels sit tight below filters
- FlatButton: handle CMTextChanged to invalidate on Caption change
ADC settings (Dither/Random):
- Add DitherEnabled/RandomEnabled to TGlobalSettings (default true)
- Pass as bitmask to ConfigureDDCs DDC Specific packet bytes 5/6
- Exposed in Settings → Advanced tab with live apply via ApplyADCSettings
Web server settings:
- Add TWebSettings (enabled, port, bind_addr, user, pass) stored globally
- WebServer: configurable port/bind IP via ParseIPv4; Reconfigure method
- Exposed in Settings → Advanced tab with live apply via ApplyWebSettings
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- WebServer: add fwd_w, swr, pa_max_power to state JSON and PushSpectrum
- MainForm: pass FLastFwdW, FLastSWR, FPAMaxPower to PushSpectrum
- Web UI: paintSM switches to paintTXMeter when transmitting/tuning;
same layout as desktop — two sub-bars at 44-58% height, power ticks
above, SWR ticks below, SWR>2.5 turns red with "SWR High" label
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Settings > Display: new "VFO Display" control to select max frequency
range (999 MHz / 9.999 GHz / 99.999 GHz), persisted as freq_mhz_digits
- FreqDisplay: extend digit map [0..10] to support up to 11 digit positions;
keyboard navigation adapts to MinMhzDigits dynamically
- MainForm/LayoutTopVfoBlock: VFO panel width scales automatically with
selected digit count using dynamic text measurement
- Web VFO: fix broken HTML (class attr not closed before data-s — wheel and
hover were completely non-functional); rewrite fmtVfo to use variable MHz
digit count synced from server state; fix missing </span> for .vfo-hz
- WebServer: publish freq_mhz_digits in state JSON; updated from
ApplyFreqMhzDigits so desktop and web stay in sync
- Fix Int32 overflow on frequencies above ~2.15 GHz: CATEngine.Pad V param
Int64, FormatFreq/FormatFreqSV Mhz var Int64 (Mhz*1000000 overflowed)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Format() used the system locale decimal separator, so on Russian/Eastern
European Windows smeter_dbm and float fields got commas ("−87,5"), producing
invalid JSON that JS silently dropped — breaking S-meter and frequency display.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Browser: AudioWorklet accumulates 960-sample frames, AudioEncoder encodes
to Opus, sends binary WS frame 'M' + raw Opus packet
- Server: opcode $02 handler decodes Opus via libopus, calls OnWebMic callback
- MainForm: WebOnMic converts PSingle→Double, pushes to PushTXMicSamplesD;
ApplyMOX switches mic source to txmsWeb when web client active, restores on TX-off
- WDSPEngine: added txmsWeb to TTXMicSource enum
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Deadlock: BroadcastBinary held FClientLock during blocking SockSend;
slow/stalled client caused Stop() to wait forever. Fix: set SO_SNDTIMEO=1s
on each accepted socket so SockSend returns error instead of hanging,
mark client wsClosed on send failure so subsequent ticks skip it.
Mobile: move TONE/TX-slider/MOX to front of toolbar via CSS order so
they are immediately visible without horizontal scroll on phones.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add 'dup' field to state JSON (FDisplayDuplex). In CTUN+non-DUP TX,
use vfo_a_hz as spectrum center so the TX signal renders at the VFO
position instead of the display center. In CTUN+DUP TX, keep center_hz
so the RX spectrum stays correctly positioned at the filter.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add freq_a command: sets VFO A regardless of active VFO; fixes A=B and
SWAP when VFO B is active (prev. sent freq_b which overwrote wrong VFO)
- Add pend("freq") to B=A / A=B / SWAP to guard local display during round-trip
- RX step attenuator: HPSDRNetwork.SetStepAtten → bytes 1442/1443 in HP packet;
WebServer attn command; MainForm FAtten + SyncWebAttn; attSel.onchange in JS
- TUN mode: set_tun WebSocket command wired to ApplyTUN(); toneBtn toggles
with on/off highlight and pending protection; tuning field in state JSON
- FNP button opens semi-transparent filter overlay (10 buttons, 5×2 grid)
with mode-appropriate widths (SSB/CW/AM/FM); active filter highlighted;
cur.filter_bw updated immediately on click so passband redraws within 50ms
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ew8bakandClaude Sonnet 4.6