3 Commits

Include renames

Author	SHA1	Message	Date
ew8bakandClaude Opus 4.8	3fe5cf3fad	feat: QO-100 mode — separate RX/TX LO + dedicated settings page ... QO-100 reuses the transverter path (VFO/band-stack/beacon-lock untouched) with a split LO for the geostationary transponder: - TXvtrEntry += FullDuplexTx + TxLOOffset (persisted). Reserve the last XVTR slot (QO100_SLOT) for QO-100; migration restores the template when the slot is unset or has empty offsets (fixes old configs showing zeros). - XvtrTranslateTX: TX LO = visible - TxLOOffset (no LNB LOError) for QO-100; identical to RX translate for normal transverters. Switched all TX-side translate calls (controller + MainForm). - SetDuplex wired (live KeepRXDuringTX); auto display-duplex on QO-100 entry. - New "QO-100" settings page (LNB LO / transponder offset / downlink edges / RX gain / TX ceiling + live RX-IF/TX readout); QO slot hidden from the transverter table. Reuses OnXvtrChange — no MainForm wiring needed. - doc/PLUTO_INTEGRATION_PLAN.md: phase 5 done. Builds clean (headless + qt6 GUI). Not yet verified on hardware. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-19 15:30:23 +03:00
ew8bakandClaude Opus 4.8	d08fc17056	feat: Pluto TX path — attenuation-based power, full-duplex IQ stream ... TX path for Pluto/AD936x (RX was already working): - PlutoBackend: continuous full-duplex TX stream (cf-ad9361-dds-core-lpc) with FIFO + push thread; SendDUCIQ upsamples WDSP 192k -> device rate (integer, linear interp), 24->16 bit, Q inverted; zeros on underrun. - Power via output attenuator (ADI-recommended): SetTxAtten writes hardwaregain on voltage0(out). Controller maps drive% -> dB (PlutoTxAttForDrive/ApplyPlutoTxAtten); -89.75 dB on RX (~off), ceiling PlutoTxMaxAttDb on 100% drive. - Configurable max-att (default -10 dB, ADI-linear) for external amp: persisted in global settings, UI spin on PA page, routed through controller SetPlutoTxMaxAtt (UI stays decoupled from logic). - RadioBackend: virtual SetTxAtten (no-op for HPSDR). - Update doc/PLUTO_INTEGRATION_PLAN.md: phases 3/4/5 + risks. Builds clean (headless + qt6 GUI). Not yet verified on hardware. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-19 12:27:49 +03:00
ew8bakandClaude Opus 4.8	a988849d3e	feat: Pluto/AD936x SDR backend (discovery, RX, VHF band plan) ... Add ADALM-Pluto / AD9361 support as a second hardware backend alongside openHPSDR, sharing the WDSP DSP pipeline and the existing controller API (UI stays decoupled from logic). - RadioBackend.pas: abstract TRadioBackend + TBackendCaps + TRadioDevice (Kind/URI/Serial). THPSDRNetwork now derives from it (state via virtual getters); TRadioController.FNetwork is the base type. - IIOBindings.pas: dynamic libiio loader (runs without libiio present). - PlutoBackend.pas: scan/probe-by-URI, connect, LO/rate/bandwidth/gain control, RX streaming thread (int16->24bit BE -> OnDDCIQ), Q conjugated to match WDSP IQ convention. Verified on LibreSDR (AD9361) over network. - Unified discovery: TDiscoverThread scans both backends; network Plutos found via direct ProbeURI (no mDNS needed). ConnectDevice dispatches by Dev.Kind (EnsureBackend swaps backend, preserving callbacks). - DeviceStore/DeviceForm: persist Kind/URI/Serial; save Pluto via AddSavedPluto so saved/autostart devices reconnect across restarts. - VHF/UHF band plan (BoardUtils, kind-aware): 6m..ADS-B for Pluto; fixes HF clamps (band detect, mouse-wheel 60 MHz cap, freq-display max). - SampleRateOverlay: configurable presets (Pluto 576k..5760k, >520 ksps), auto-width to fit. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-16 18:55:20 +03:00