NR/NB modes, SNB/ANF flags, and drive % were stored only in the widgets
themselves (Btn*.Tag, TrkDrive.Position) — the last hard blocker to a
headless/daemon mode, since without those controls the state had nowhere
to live and CAT/Web read them directly.
- NR/NB: BtnNR.Tag/BtnNB.Tag -> FController.FNRMode/FNBMode (Integer).
- SNB/ANF: BtnSNB.Tag/BtnANF.Tag (0/1) -> FController.FSNB/FANF (Boolean).
- Drive %: TrkDrive.Position -> new FController.FDrivePercent; the slider
is now pure input (TrkDriveChange pushes its value into the controller),
while FDriveLevel stays the derived hardware byte.
Buttons/sliders become pure view+input: click handlers and UpdateXButton
read/write the controller field; CAT getters, the web snapshot, and
GetSnapshot all source state from the controller, not the widgets.
No behavioral change. Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Decouple MainForm from CAT/Web by introducing a headless core,
TRadioController, as the single home for radio state and engine objects.
This is groundwork for swappable UIs, a daemon (Web-only) mode, and a
future hardware control panel — each becomes a frontend/adapter over the
same controller API.
RadioController.pas (new):
- Radio state + engine objects (Network/DSP/Audio/Settings/Channels) as
public fields named exactly as in MainForm, so wiring is mechanical.
- Command API: absolute Set* plus relative *By/Up/Down (for encoders).
- OnStateChanged(field) notifications and GetSnapshot for frontend sync.
- Invoke/OnInvoke (TUIInvokeEvent) thread-marshalling seam (GUI uses
TThread.Synchronize; daemon supplies its own).
- Commands are scaffolding for now (update field + fire event); engine
logic stays in MainForm and migrates in later phases (TODO-wiring).
MainForm.pas:
- Owns FController; creates it first in FormCreate, frees it last in
FormDestroy. Engines are still created/freed by MainForm into the
controller's fields (ownership move is a later phase).
- ~1400 FXxx references redirected to FController.FXxx (implementation
only); dead field declarations removed from the interface.
No behavioral change — pure state relocation. Builds clean (cocoa).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a "Send audio stream to radio (built-in speaker)" checkbox on the
Settings → Audio tab. It is a single switch for the radio's built-in
speaker:
- ON — RX audio is streamed to the radio via the DDC Audio packet
(port 1028, 64 L/R pairs per packet) and the speaker is unmuted
(High Priority byte 1400 bit1 = 0).
- OFF — speaker is muted (byte 1400 bit1 = 1, ANAN-8000DLE IO1 output)
and no audio stream is sent.
The float->int16 conversion and 64-pair packet accumulation live in
THPSDRNetwork (SendSpeakerAudio/SetSpeakerAudio), next to SendDDCAudio;
MainForm only reads the setting and forwards the audio. State is
persisted per-MAC (send_audio_to_radio, default off) and re-applied on
each radio start.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Wires the new wdsp WFM API into the engine and adds a WFM preset to the
FM filter row (200 kHz BW / 75 kHz deviation). Also fixes WDSP_SAM
constant which was 12 — that slot is now RXA_WFM in the updated enum.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Mirror the existing Wideband gradient fill option for the main spectrum:
a "Spectrum gradient fill" checkbox on the Display settings tab gates the
under-curve gradient in TSpectrumView.DrawSpectrum. The curve, grid,
filter band and VFO markers always draw; only the gradient is optional.
Persisted as spectrum_fill in settings JSON (default True, preserving
current appearance). Wired through Settings -> SettingsForm visibility
event -> MainForm -> TSpectrumView.FillSpectrum, same path as
WidebandFill.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ApplyChannel now sets TrkDrive from Ch.Power; saves pre-channel level in
FPreChannelPower (works around TrkDriveChange clearing the field on assignment)
- Power is restored when tuning away from channel (CheckChannelActive) or on
first VFO movement after returning to band with no active channel (ApplyVfoA)
- Manual drive slider move clears FPreChannelPower so restore is skipped
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- New ChannelStore.pas: TChannel record + JSON persistence (channels.json)
- New ChannelsForm.pas: full channel editor (list + fields, pre-fills from current radio state)
- CH button in RX block: left-click opens dropdown, right-click opens editor
- Active channel: button highlights with channel name, deactivates on VFO move
- ApplyChannel: auto-switches XVTR/HF band based on channel frequency; saves old
band state before switching to prevent cache corruption
- SaveCurrentBand: skip save when VFO > 61 MHz (prevents HF cache corruption
from VHF channel application without XVTR)
- DeactivateXvtr: save full XVTR state (was only saving LastFreq)
- CTCSS/RPT from channel marked as auto: cleared automatically when tuning away
from channel frequency; survives band switches via FXvtrSettings auto-flags
- TXvtrEntry: add LastCTCSSAutoActive, LastFMRptAutoActive fields
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add PanelRXBlock between TX and Band with CTUN, VOL, NR/NB/SNB/ANF/MUTE
- Move AGC panel to sit directly below RX block for logical RX grouping
- Move DUP button into TX panel below MOX/TUN
- Rename PanelRX → PanelAGC to match its content
- Standardize block label top (2px) and first-control top (16px) across all
panels: AGC, SQL, CTCSS, STEP were inconsistent
- Fix left panel width restore after hide: save actual DPI-scaled width before
zeroing instead of hardcoding 232, preventing panel truncation on Win32 with
display scaling enabled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
(ClickFreq div StepHz)*StepHz always snapped downward; replaced with
((ClickFreq + StepHz/2) div StepHz)*StepHz so clicks above the midpoint
between two steps correctly snap to the higher one.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces TProgressBar in TWisdomProgressDialog with TFlatProgressBar,
drawn entirely via Canvas (plain rectangle, no native widget styling).
Dialog now receives the active TAppTheme so both dark and light themes
are applied consistently to background, label, and progress bar.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- LFM: Position = poDesigned (was poScreenCenter, overriding our restore)
- RestoreWindowBounds: remove position scaling (L,T invariant across DPI);
scale size correctly per backend: LCLWin32 uses CurDPI/SavedDPI (physical px),
Qt6/GTK/Cocoa use SavedDPI/CurDPI (logical px, inverse); fix min-size
inflation on Qt6 (was MulDiv(900,DPI,96) which exceeds logical screen width
at 150%+ scale, forcing window to 0,0)
- SaveWindowBounds moved from FormDestroy to FormClose while window is still
stable; add guard for bogus RestoredLeft/Top values on Qt6 when maximized
- RestoreWindowBounds stores FRestoreL/T and re-applies position in AfterShowTick
(200ms after show) when WM frame extents are already known to Qt, fixing the
systematic right/down drift caused by unknown frame extents at FormCreate time
- Save and restore WindowState (maximized flag); skip AfterShowTick position
re-apply when window is maximized
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove ResizeSMeter (Pango font measurement + multiple SetBounds) from 60 Hz timer tick;
it is still called on actual resize events
- Throttle UpdateAGCLines WDSP API calls from 60 Hz to ~10 Hz (every 6 ticks)
- Optimize spectrum alpha-fix loop: write-only byte access instead of read-modify-write DWORD
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SpectrumView: rewrite DrawSpectrumGradient to blend directly into
FSpectrumBitmap via ScanLine instead of TLazIntfImage+BitBlt (stale DC
on win32). Add alpha=$FF fixup pass so pf32bit Canvas.Draw renders via
StretchBlt not AlphaBlend. Remove FSpecGradImg/FSpecGradBmp fields.
MainForm: mask exZeroDivide/exInvalidOp in FormCreate so WDSP DLL
divide-by-zero does not crash the DSP thread on win32 (Qt6 already
masks FPU exceptions globally).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add SampleRateOverlay.pas: TCustomControl overlay (top-left of spectrum)
with hide-panel button and 6 span buttons (48k–1536k), same hit-test
pattern as VfoOverlay
- Consolidate toolbar: move PanelTopVfoGroup and PanelSMeterRight into
PanelToolbar (height 72) instead of floating on the form
- Remove PanelSpanButtons (alTop spacer) that caused the ~1cm black strip
at the top of the spectrum
- Add separator line inside PanelToolbar anchored to its bottom edge,
with 16px left/right margins
- Fix left panel blocks starting Y offset (was 38, now 0)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
AGC button in DSP row shows current mode (FAST/MED/SLOW/LONG/OFF).
Click toggles a picker row below; selecting a mode closes it, fires
OnAGCChange, and syncs MainForm BtnAGCMode buttons and DSP engine.
Overlay height expands 136→159 px while picker is open.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Moves CTCSS tone picker and FM step picker from inline TPanel+TFlatButton
arrays into a standalone FlatDropDown.pas module. TFlatDropDown owns the
popup panel, handles positioning and item selection, and fires OnSelect.
ApplyStyle syncs button colors on theme change.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Third button row mirrors MainForm NR (cycle 0-4), NB (cycle 0-2),
SNB and ANF toggles. OnDSPChange event syncs state back to MainForm
buttons and DSP engine. Overlay height tightened to match top/bottom
padding.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- FM filter row now shows only NFM (11 kHz) and FM (16 kHz) matching MainForm
- OnModeFilterSelect updates FFMDeviation and FFilter index for FM mode
- Mode and filter button widths distributed evenly (proportional, not fixed BtnW)
- S-meter inset by extra 4 px on each side
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
WebOnMic: drop intermediate Singles[] array, read PSingle directly.
PushAudio: replace per-frame SetLength/array of Byte with pre-allocated
FWsAudioBuf field — eliminates heap allocation from the DSP thread.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove manual "Mic Source" (Radio/SoundCard) setting from UI and storage;
source is now determined automatically in ApplyMOX: HW PTT → txmsRadio,
MOX button/CAT → txmsSoundCard if audio device configured, else txmsRadio
- Replace "Line in" checkbox with "Mic jack" combo (Mic In / Line In);
when Line In is selected, Mic Boost is hidden and Line In Gain (-34.5..+12 dB,
step 1.5 dB) is shown and sent as DUC Specific byte 51
- Add Tip/Ring connector selector (Orion/OrionMkII boards 4/5 only, byte 50 bit 3);
control is hidden for other board types
- Fix byte 50 bit 1 (Mic Boost) suppressed when Line In is active
- Fix byte 51 comment polarity (was reversed: 0=+12dB; correct: 0=-34.5dB)
- New JSON fields: mic_line_in, mic_tip_ring, line_in_gain_db; mic_source removed
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UserADC1 (bytes 55-56) carries current sensor data on the ANAN-8000DLE.
Formula from Thetis: amps = ((adc/4095 * 5000) - 360) / 120 (Voff=360mV,
Sens=120mV/A). Status bar now shows "Supply: 13.8V / 2.3A | PLL OK"
when current is available.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
PA calibration per band (HF and VHF):
- Add VHFBandCal[0..7] in TGlobalSettings (saved as vhf_cal_0..7 in JSON)
- Default HF cal updated to Thetis HERMES defaults (38.8-41.3 dB per band)
- Default VHF cal = 56.2 dB (Thetis HERMES XVTR default)
- SettingsForm: second group in PA tab "VHF Calibration (Transverters)" with
8 spinboxes VHF0..VHF7; labels dynamically show XVTR slot ButtonText
when LoadXvtrSettings is called (e.g. "VHF0 (2m):")
TX drive formula (CalcDriveByte) rewritten to match Thetis exactly:
drive_byte = min(sqrt(10^((10*log10(pwr_W*1000) - Cal)/10) * 0.05) / 0.8, 1.0) * 1.02 * 255
Cal = PA gain in dB (not a percentage); matches Thetis verified output
(Cal=63.1 + slider=100% + PAMax=100W → drive_byte=16, verified against Thetis)
Old formula Pos/100*Cal/100*255 was wrong: treated dB gain as linear percent
Fix stale FDriveLevel not updated on band/XVTR switch:
- Startup: FCurrentBand must be set before CalcDriveByte (was reversed)
- RestoreBand: recalculate FDriveLevel before ApplyVfoA network update
- ActivateXvtrBand: recalculate after FCurrentXvtr changes
- ApplyVfoA: recalculate when VFO crosses HF band boundary
- FreqDispBChanged: same for VFO-B band changes
- ApplyMOX(True): safety recalculate at PTT engage time
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Web UI: stepSel.onchange now sends fm_step command to server when in FM
mode; option values stay in Hz so tuneStep works unchanged.
WebServer: add fm_step command handler and OnFMStep callback.
MainForm: wire WebOnFMStep -> SyncWebFMStep -> SetFMStep + SaveCurrentBand.
Web spectrum/ruler: vertical FM-step grid lines in drawSpec; FM-aligned
ticks and labels in drawRuler with auto label-density (short ticks between
labeled lines, measureText-based labelMult to prevent overlap).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When FM mode is active, vertical grid lines and frequency labels snap to
FM channel boundaries (FM_STEP_HZ) instead of the fixed 8-division layout.
Grid and label density auto-adapt: lines thinner than 4px are thinned,
labels are spaced so they never overlap (short tick shown between labeled
lines). Grid cache invalidates on center-freq, step, or span changes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add LastCTun, LastAGCMode, LastAGCTop to TXvtrEntry; SaveCurrentBand
now captures all three in the XVTR branch; ActivateXvtrBand restores
them on slot switch/startup (previously CTun was always reset to False
and AGC was never saved/restored for XVTR)
- WebServer: expose fmstep_idx in state JSON so web clients sync the
FM step from desktop state
- WebPageHtml: swap stepSel options to FM steps (6.25k/12.5k/20k/25k)
when mode=FM, restore HF steps when leaving FM; syncs fmstep_idx
from server on connect and mode change
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix web spectrum scroll resetting freq to XVTR minimum (same root
cause as desktop: hardcoded 60 MHz clamp; now delegates to server)
- Save/restore FM mode, NFM/WFM filter, squelch, CTCSS per XVTR slot
and per HF band (CTCSSOn/ToneIdx added to TBandSettings; full state
added to TXvtrEntry; ActivateXvtrBand restores all on slot switch)
- Fix UpdateFilterButtons always resetting NFM/WFM to default on
mode restore; now preserves saved filter index
- Add FM Step tuning: panel with STEP toggle + 6.25/12.5/20/25 kHz
selector (popup); mouse wheel uses selected step in FM mode;
state saved per band and XVTR slot
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- LSB/USB: 5.0k–1.0k (unchanged)
- DSB: split into own group 16k–2.4k (was sharing AM filters)
- CWL/CWU: 1.0k 800 600 500 400 250 150 100 50 25 (removed 750, added 150)
- AM/SAM: 20k–5.0k (new wider range)
- Web FNP FM: now shows NFM/FM only (11k/16k), matching desktop
- Fix SyncWebFilter: FM array out-of-bounds; FFMDeviation now set on web filter select
- VfoOverlay: DSB separated from SSB with own quick-select values
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ew8bak